Next: , Previous: , Up: Top   [Contents][Index]

25 itensor


Next: , Previous: , Up: itensor   [Contents][Index]

25.1 Introduction to itensor

Maxima implements symbolic tensor manipulation of two distinct types: component tensor manipulation (ctensor package) and indicial tensor manipulation (itensor package).

Nota bene: Please see the note on ’new tensor notation’ below.

Component tensor manipulation means that geometrical tensor objects are represented as arrays or matrices. Tensor operations such as contraction or covariant differentiation are carried out by actually summing over repeated (dummy) indices with do statements. That is, one explicitly performs operations on the appropriate tensor components stored in an array or matrix.

Indicial tensor manipulation is implemented by representing tensors as functions of their covariant, contravariant and derivative indices. Tensor operations such as contraction or covariant differentiation are performed by manipulating the indices themselves rather than the components to which they correspond.

These two approaches to the treatment of differential, algebraic and analytic processes in the context of Riemannian geometry have various advantages and disadvantages which reveal themselves only through the particular nature and difficulty of the user’s problem. However, one should keep in mind the following characteristics of the two implementations:

The representation of tensors and tensor operations explicitly in terms of their components makes ctensor easy to use. Specification of the metric and the computation of the induced tensors and invariants is straightforward. Although all of Maxima’s powerful simplification capacity is at hand, a complex metric with intricate functional and coordinate dependencies can easily lead to expressions whose size is excessive and whose structure is hidden. In addition, many calculations involve intermediate expressions which swell causing programs to terminate before completion. Through experience, a user can avoid many of these difficulties.

Because of the special way in which tensors and tensor operations are represented in terms of symbolic operations on their indices, expressions which in the component representation would be unmanageable can sometimes be greatly simplified by using the special routines for symmetrical objects in itensor. In this way the structure of a large expression may be more transparent. On the other hand, because of the special indicial representation in itensor, in some cases the user may find difficulty with the specification of the metric, function definition, and the evaluation of differentiated "indexed" objects.

The itensor package can carry out differentiation with respect to an indexed variable, which allows one to use the package when dealing with Lagrangian and Hamiltonian formalisms. As it is possible to differentiate a field Lagrangian with respect to an (indexed) field variable, one can use Maxima to derive the corresponding Euler-Lagrange equations in indicial form. These equations can be translated into component tensor (ctensor) programs using the ic_convert function, allowing us to solve the field equations in a particular coordinate representation, or to recast the equations of motion in Hamiltonian form. See einhil.dem and bradic.dem for two comprehensive examples. The first, einhil.dem, uses the Einstein-Hilbert action to derive the Einstein field tensor in the homogeneous and isotropic case (Friedmann equations) and the spherically symmetric, static case (Schwarzschild solution.) The second, bradic.dem, demonstrates how to compute the Friedmann equations from the action of Brans-Dicke gravity theory, and also derives the Hamiltonian associated with the theory’s scalar field.

Categories:  Tensors Share packages Package itensor

25.1.1 New tensor notation

Earlier versions of the itensor package in Maxima used a notation that sometimes led to incorrect index ordering. Consider the following, for instance:

(%i2) imetric(g);
(%o2)                                done
(%i3) ishow(g([],[j,k])*g([],[i,l])*a([i,j],[]))$
                                 i l  j k
(%t3)                           g    g    a
                                           i j
(%i4) ishow(contract(%))$
                                      k l
(%t4)                                a

This result is incorrect unless a happens to be a symmetric tensor. The reason why this happens is that although itensor correctly maintains the order within the set of covariant and contravariant indices, once an index is raised or lowered, its position relative to the other set of indices is lost.

To avoid this problem, a new notation has been developed that remains fully compatible with the existing notation and can be used interchangeably. In this notation, contravariant indices are inserted in the appropriate positions in the covariant index list, but with a minus sign prepended. Functions like contract_Itensor and ishow are now aware of this new index notation and can process tensors appropriately.

In this new notation, the previous example yields a correct result:

(%i5) ishow(g([-j,-k],[])*g([-i,-l],[])*a([i,j],[]))$
                                 i l       j k
(%t5)                           g    a    g
                                      i j
(%i6) ishow(contract(%))$
                                      l k
(%t6)                                a

Presently, the only code that makes use of this notation is the lc2kdt function. Through this notation, it achieves consistent results as it applies the metric tensor to resolve Levi-Civita symbols without resorting to numeric indices.

Since this code is brand new, it probably contains bugs. While it has been tested to make sure that it doesn’t break anything using the "old" tensor notation, there is a considerable chance that "new" tensors will fail to interoperate with certain functions or features. These bugs will be fixed as they are encountered... until then, caveat emptor!

25.1.2 Indicial tensor manipulation

The indicial tensor manipulation package may be loaded by load("itensor"). Demos are also available: try demo("tensor").

In itensor a tensor is represented as an "indexed object" . This is a function of 3 groups of indices which represent the covariant, contravariant and derivative indices. The covariant indices are specified by a list as the first argument to the indexed object, and the contravariant indices by a list as the second argument. If the indexed object lacks either of these groups of indices then the empty list [] is given as the corresponding argument. Thus, g([a,b],[c]) represents an indexed object called g which has two covariant indices (a,b), one contravariant index (c) and no derivative indices.

The derivative indices, if they are present, are appended as additional arguments to the symbolic function representing the tensor. They can be explicitly specified by the user or be created in the process of differentiation with respect to some coordinate variable. Since ordinary differentiation is commutative, the derivative indices are sorted alphanumerically, unless iframe_flag is set to true, indicating that a frame metric is being used. This canonical ordering makes it possible for Maxima to recognize that, for example, t([a],[b],i,j) is the same as t([a],[b],j,i). Differentiation of an indexed object with respect to some coordinate whose index does not appear as an argument to the indexed object would normally yield zero. This is because Maxima would not know that the tensor represented by the indexed object might depend implicitly on the corresponding coordinate. By modifying the existing Maxima function diff in itensor, Maxima now assumes that all indexed objects depend on any variable of differentiation unless otherwise stated. This makes it possible for the summation convention to be extended to derivative indices. It should be noted that itensor does not possess the capabilities of raising derivative indices, and so they are always treated as covariant.

The following functions are available in the tensor package for manipulating indexed objects. At present, with respect to the simplification routines, it is assumed that indexed objects do not by default possess symmetry properties. This can be overridden by setting the variable allsym[false] to true, which will result in treating all indexed objects completely symmetric in their lists of covariant indices and symmetric in their lists of contravariant indices.

The itensor package generally treats tensors as opaque objects. Tensorial equations are manipulated based on algebraic rules, specifically symmetry and contraction rules. In addition, the itensor package understands covariant differentiation, curvature, and torsion. Calculations can be performed relative to a metric of moving frame, depending on the setting of the iframe_flag variable.

A sample session below demonstrates how to load the itensor package, specify the name of the metric, and perform some simple calculations.

(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) imetric(g);
(%o2)                                done
(%i3) components(g([i,j],[]),p([i,j],[])*e([],[]))$
(%i4) ishow(g([k,l],[]))$
(%t4)                               e p
                                       k l
(%i5) ishow(diff(v([i],[]),t))$
(%t5)                                  0
(%i6) depends(v,t);
(%o6)                               [v(t)]
(%i7) ishow(diff(v([i],[]),t))$
                                    d
(%t7)                               -- (v )
                                    dt   i
(%i8) ishow(idiff(v([i],[]),j))$
(%t8)                                v
                                      i,j
(%i9) ishow(extdiff(v([i],[]),j))$
(%t9)                             v    - v
                                   j,i    i,j
                                  -----------
                                       2
(%i10) ishow(liediff(v,w([i],[])))$
                               %3          %3
(%t10)                        v   w     + v   w
                                   i,%3    ,i  %3
(%i11) ishow(covdiff(v([i],[]),j))$
                                              %4
(%t11)                        v    - v   ichr2
                               i,j    %4      i j
(%i12) ishow(ev(%,ichr2))$
                %4 %5
(%t12) v    - (g      v   (e p       + e   p     - e p       - e    p
        i,j            %4     j %5,i    ,i  j %5      i j,%5    ,%5  i j

                                         + e p       + e   p    ))/2
                                              i %5,j    ,j  i %5
(%i13) iframe_flag:true;
(%o13)                               true
(%i14) ishow(covdiff(v([i],[]),j))$
                                             %6
(%t14)                        v    - v   icc2
                               i,j    %6     i j
(%i15) ishow(ev(%,icc2))$
                                             %6
(%t15)                        v    - v   ifc2
                               i,j    %6     i j
(%i16) ishow(radcan(ev(%,ifc2,ifc1)))$
             %6 %7                    %6 %7
(%t16) - (ifg      v   ifb       + ifg      v   ifb       - 2 v
                    %6    j %7 i             %6    i j %7      i,j

                                             %6 %7
                                        - ifg      v   ifb      )/2
                                                    %6    %7 i j
(%i17) ishow(canform(s([i,j],[])-s([j,i])))$
(%t17)                            s    - s
                                   i j    j i
(%i18) decsym(s,2,0,[sym(all)],[]);
(%o18)                               done
(%i19) ishow(canform(s([i,j],[])-s([j,i])))$
(%t19)                                 0
(%i20) ishow(canform(a([i,j],[])+a([j,i])))$
(%t20)                            a    + a
                                   j i    i j
(%i21) decsym(a,2,0,[anti(all)],[]);
(%o21)                               done
(%i22) ishow(canform(a([i,j],[])+a([j,i])))$
(%t22)                                 0

Previous: , Up: itensor   [Contents][Index]

25.2 Functions and Variables for itensor

25.2.1 Managing indexed objects

Function: dispcon
    dispcon (tensor_1, tensor_2, …)
    dispcon (all)

Displays the contraction properties of its arguments as were given to defcon. dispcon (all) displays all the contraction properties which were defined.

Categories:  Display functions

Function: entertensor (name)

is a function which, by prompting, allows one to create an indexed object called name with any number of tensorial and derivative indices. Either a single index or a list of indices (which may be null) is acceptable input (see the example under covdiff).

Categories:  Package itensor

Function: changename (old, new, expr)

will change the name of all indexed objects called old to new in expr. old may be either a symbol or a list of the form [name, m, n] in which case only those indexed objects called name with m covariant and n contravariant indices will be renamed to new.

Categories:  Package itensor

Function: listoftens

Lists all tensors in a tensorial expression, complete with their indices. E.g.,


(%i6) ishow(a([i,j],[k])*b([u],[],v)+c([x,y],[])*d([],[])*e)$
                                         k
(%t6)                        d e c    + a    b
                                  x y    i j  u,v
(%i7) ishow(listoftens(%))$
                               k
(%t7)                        [a   , b   , c   , d]
                               i j   u,v   x y

Categories:  Package itensor

Function: ishow (expr)

displays expr with the indexed objects in it shown having their covariant indices as subscripts and contravariant indices as superscripts. The derivative indices are displayed as subscripts, separated from the covariant indices by a comma (see the examples throughout this document).

Categories:  Package itensor

Function: indices (expr)

Returns a list of two elements. The first is a list of the free indices in expr (those that occur only once). The second is the list of the dummy indices in expr (those that occur exactly twice) as the following example demonstrates.


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) ishow(a([i,j],[k,l],m,n)*b([k,o],[j,m,p],q,r))$
                                k l      j m p
(%t2)                          a        b
                                i j,m n  k o,q r
(%i3) indices(%);
(%o3)                 [[l, p, i, n, o, q, r], [k, j, m]]

A tensor product containing the same index more than twice is syntactically illegal. indices attempts to deal with these expressions in a reasonable manner; however, when it is called to operate upon such an illegal expression, its behavior should be considered undefined.

Categories:  Package itensor

Function: rename
    rename (expr)
    rename (expr, count)

Returns an expression equivalent to expr but with the dummy indices in each term chosen from the set [%1, %2,...], if the optional second argument is omitted. Otherwise, the dummy indices are indexed beginning at the value of count. Each dummy index in a product will be different. For a sum, rename will operate upon each term in the sum resetting the counter with each term. In this way rename can serve as a tensorial simplifier. In addition, the indices will be sorted alphanumerically (if allsym is true) with respect to covariant or contravariant indices depending upon the value of flipflag. If flipflag is false then the indices will be renamed according to the order of the contravariant indices. If flipflag is true the renaming will occur according to the order of the covariant indices. It often happens that the combined effect of the two renamings will reduce an expression more than either one by itself.


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) allsym:true;
(%o2)                                true
(%i3) g([],[%4,%5])*g([],[%6,%7])*ichr2([%1,%4],[%3])*
ichr2([%2,%3],[u])*ichr2([%5,%6],[%1])*ichr2([%7,r],[%2])-
g([],[%4,%5])*g([],[%6,%7])*ichr2([%1,%2],[u])*
ichr2([%3,%5],[%1])*ichr2([%4,%6],[%3])*ichr2([%7,r],[%2]),noeval$
(%i4) expr:ishow(%)$
       %4 %5  %6 %7      %3         u          %1         %2
(%t4) g      g      ichr2      ichr2      ichr2      ichr2
                         %1 %4      %2 %3      %5 %6      %7 r

        %4 %5  %6 %7      u          %1         %3         %2
     - g      g      ichr2      ichr2      ichr2      ichr2
                          %1 %2      %3 %5      %4 %6      %7 r
(%i5) flipflag:true;
(%o5)                                true
(%i6) ishow(rename(expr))$
       %2 %5  %6 %7      %4         u          %1         %3
(%t6) g      g      ichr2      ichr2      ichr2      ichr2
                         %1 %2      %3 %4      %5 %6      %7 r

        %4 %5  %6 %7      u          %1         %3         %2
     - g      g      ichr2      ichr2      ichr2      ichr2
                          %1 %2      %3 %4      %5 %6      %7 r
(%i7) flipflag:false;
(%o7)                                false
(%i8) rename(%th(2));
(%o8)                                  0
(%i9) ishow(rename(expr))$
       %1 %2  %3 %4      %5         %6         %7        u
(%t9) g      g      ichr2      ichr2      ichr2     ichr2
                         %1 %6      %2 %3      %4 r      %5 %7

        %1 %2  %3 %4      %6         %5         %7        u
     - g      g      ichr2      ichr2      ichr2     ichr2
                          %1 %3      %2 %6      %4 r      %5 %7

Categories:  Package itensor

Function: show (expr)

Displays expr with the indexed objects in it shown having covariant indices as subscripts, contravariant indices as superscripts. The derivative indices are displayed as subscripts, separated from the covariant indices by a comma.

Option variable: flipflag

Default value: false

If false then the indices will be renamed according to the order of the contravariant indices, otherwise according to the order of the covariant indices.

If flipflag is false then rename forms a list of the contravariant indices as they are encountered from left to right (if true then of the covariant indices). The first dummy index in the list is renamed to %1, the next to %2, etc. Then sorting occurs after the rename-ing (see the example under rename).

Categories:  Package itensor

Function: defcon
    defcon (tensor_1)
    defcon (tensor_1, tensor_2, tensor_3)

gives tensor_1 the property that the contraction of a product of tensor_1 and tensor_2 results in tensor_3 with the appropriate indices. If only one argument, tensor_1, is given, then the contraction of the product of tensor_1 with any indexed object having the appropriate indices (say my_tensor) will yield an indexed object with that name, i.e. my_tensor, and with a new set of indices reflecting the contractions performed. For example, if imetric:g, then defcon(g) will implement the raising and lowering of indices through contraction with the metric tensor. More than one defcon can be given for the same indexed object; the latest one given which applies in a particular contraction will be used. contractions is a list of those indexed objects which have been given contraction properties with defcon.

Categories:  Package itensor

Function: remcon
    remcon (tensor_1, ..., tensor_n)
    remcon (all)

Removes all the contraction properties from the (tensor_1, ..., tensor_n). remcon(all) removes all contraction properties from all indexed objects.

Categories:  Package itensor

Function: contract (expr)

Carries out the tensorial contractions in expr which may be any combination of sums and products. This function uses the information given to the defcon function. For best results, expr should be fully expanded. ratexpand is the fastest way to expand products and powers of sums if there are no variables in the denominators of the terms. The gcd switch should be false if GCD cancellations are unnecessary.

Categories:  Package itensor

Function: indexed_tensor (tensor)

Must be executed before assigning components to a tensor for which a built in value already exists as with ichr1, ichr2, icurvature. See the example under icurvature.

Categories:  Package itensor

Function: components (tensor, expr)

permits one to assign an indicial value to an expression expr giving the values of the components of tensor. These are automatically substituted for the tensor whenever it occurs with all of its indices. The tensor must be of the form t([...],[...]) where either list may be empty. expr can be any indexed expression involving other objects with the same free indices as tensor. When used to assign values to the metric tensor wherein the components contain dummy indices one must be careful to define these indices to avoid the generation of multiple dummy indices. Removal of this assignment is given to the function remcomps.

It is important to keep in mind that components cares only about the valence of a tensor, not about any particular index ordering. Thus assigning components to, say, x([i,-j],[]), x([-j,i],[]), or x([i],[j]) all produce the same result, namely components being assigned to a tensor named x with valence (1,1).

Components can be assigned to an indexed expression in four ways, two of which involve the use of the components command:

1) As an indexed expression. For instance:

(%i2) components(g([],[i,j]),e([],[i])*p([],[j]))$
(%i3) ishow(g([],[i,j]))$
                                      i  j
(%t3)                                e  p

2) As a matrix:


(%i5) lg:-ident(4)$lg[1,1]:1$lg;
                            [ 1   0    0    0  ]
                            [                  ]
                            [ 0  - 1   0    0  ]
(%o5)                       [                  ]
                            [ 0   0   - 1   0  ]
                            [                  ]
                            [ 0   0    0   - 1 ]
(%i6) components(g([i,j],[]),lg);
(%o6)                                done
(%i7) ishow(g([i,j],[]))$
(%t7)                                g
                                      i j
(%i8) g([1,1],[]);
(%o8)                                  1
(%i9) g([4,4],[]);
(%o9)                                 - 1

3) As a function. You can use a Maxima function to specify the components of a tensor based on its indices. For instance, the following code assigns kdelta to h if h has the same number of covariant and contravariant indices and no derivative indices, and g otherwise:


(%i4) h(l1,l2,[l3]):=if length(l1)=length(l2) and length(l3)=0
  then kdelta(l1,l2) else apply(g,append([l1,l2], l3))$
(%i5) ishow(h([i],[j]))$
                                          j
(%t5)                               kdelta
                                          i
(%i6) ishow(h([i,j],[k],l))$
                                     k
(%t6)                               g
                                     i j,l

4) Using Maxima’s pattern matching capabilities, specifically the defrule and applyb1 commands:


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) matchdeclare(l1,listp);
(%o2)                                done
(%i3) defrule(r1,m(l1,[]),(i1:idummy(),
      g([l1[1],l1[2]],[])*q([i1],[])*e([],[i1])))$

(%i4) defrule(r2,m([],l1),(i1:idummy(),
      w([],[l1[1],l1[2]])*e([i1],[])*q([],[i1])))$

(%i5) ishow(m([i,n],[])*m([],[i,m]))$
                                    i m
(%t5)                              m    m
                                         i n
(%i6) ishow(rename(applyb1(%,r1,r2)))$
                           %1  %2  %3 m
(%t6)                     e   q   w     q   e   g
                                         %1  %2  %3 n

Categories:  Package itensor

Function: remcomps (tensor)

Unbinds all values from tensor which were assigned with the components function.

Categories:  Package itensor

Function: showcomps (tensor)

Shows component assignments of a tensor, as made using the components command. This function can be particularly useful when a matrix is assigned to an indicial tensor using components, as demonstrated by the following example:


(%i1) load(ctensor);
(%o1)       /share/tensor/ctensor.mac
(%i2) load("itensor");
(%o2)      /share/tensor/itensor.lisp
(%i3) lg:matrix([sqrt(r/(r-2*m)),0,0,0],[0,r,0,0],
                [0,0,sin(theta)*r,0],[0,0,0,sqrt((r-2*m)/r)]);
               [         r                                     ]
               [ sqrt(-------)  0       0              0       ]
               [      r - 2 m                                  ]
               [                                               ]
               [       0        r       0              0       ]
(%o3)          [                                               ]
               [       0        0  r sin(theta)        0       ]
               [                                               ]
               [                                      r - 2 m  ]
               [       0        0       0        sqrt(-------) ]
               [                                         r     ]
(%i4) components(g([i,j],[]),lg);
(%o4)                                done
(%i5) showcomps(g([i,j],[]));
                  [         r                                     ]
                  [ sqrt(-------)  0       0              0       ]
                  [      r - 2 m                                  ]
                  [                                               ]
                  [       0        r       0              0       ]
(%t5)      g    = [                                               ]
            i j   [       0        0  r sin(theta)        0       ]
                  [                                               ]
                  [                                      r - 2 m  ]
                  [       0        0       0        sqrt(-------) ]
                  [                                         r     ]
(%o5)                                false

The showcomps command can also display components of a tensor of rank higher than 2.

Categories:  Package itensor

Function: idummy ()

Increments icounter and returns as its value an index of the form %n where n is a positive integer. This guarantees that dummy indices which are needed in forming expressions will not conflict with indices already in use (see the example under indices).

Categories:  Package itensor

Option variable: idummyx

Default value: %

Is the prefix for dummy indices (see the example under indices).

Categories:  Package itensor

Option variable: icounter

Default value: 1

Determines the numerical suffix to be used in generating the next dummy index in the tensor package. The prefix is determined by the option idummy (default: %).

Categories:  Package itensor

Function: kdelta (L1, L2)

is the generalized Kronecker delta function defined in the itensor package with L1 the list of covariant indices and L2 the list of contravariant indices. kdelta([i],[j]) returns the ordinary Kronecker delta. The command ev(expr,kdelta) causes the evaluation of an expression containing kdelta([],[]) to the dimension of the manifold.

In what amounts to an abuse of this notation, itensor also allows kdelta to have 2 covariant and no contravariant, or 2 contravariant and no covariant indices, in effect providing a co(ntra)variant "unit matrix" capability. This is strictly considered a programming aid and not meant to imply that kdelta([i,j],[]) is a valid tensorial object.

Categories:  Package itensor

Function: kdels (L1, L2)

Symmetrized Kronecker delta, used in some calculations. For instance:


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) kdelta([1,2],[2,1]);
(%o2)                                 - 1
(%i3) kdels([1,2],[2,1]);
(%o3)                                  1
(%i4) ishow(kdelta([a,b],[c,d]))$
                             c       d         d       c
(%t4)                  kdelta  kdelta  - kdelta  kdelta
                             a       b         a       b
(%i4) ishow(kdels([a,b],[c,d]))$
                             c       d         d       c
(%t4)                  kdelta  kdelta  + kdelta  kdelta
                             a       b         a       b

Categories:  Package itensor

Function: levi_civita (L)

is the permutation (or Levi-Civita) tensor which yields 1 if the list L consists of an even permutation of integers, -1 if it consists of an odd permutation, and 0 if some indices in L are repeated.

Categories:  Package itensor

Function: lc2kdt (expr)

Simplifies expressions containing the Levi-Civita symbol, converting these to Kronecker-delta expressions when possible. The main difference between this function and simply evaluating the Levi-Civita symbol is that direct evaluation often results in Kronecker expressions containing numerical indices. This is often undesirable as it prevents further simplification. The lc2kdt function avoids this problem, yielding expressions that are more easily simplified with rename or contract.


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) expr:ishow('levi_civita([],[i,j])
                 *'levi_civita([k,l],[])*a([j],[k]))$
                                  i j  k
(%t2)                  levi_civita    a  levi_civita
                                       j            k l
(%i3) ishow(ev(expr,levi_civita))$
                                  i j  k       1 2
(%t3)                       kdelta    a  kdelta
                                  1 2  j       k l
(%i4) ishow(ev(%,kdelta))$
             i       j         j       i   k
(%t4) (kdelta  kdelta  - kdelta  kdelta ) a
             1       2         1       2   j

                               1       2         2       1
                        (kdelta  kdelta  - kdelta  kdelta )
                               k       l         k       l
(%i5) ishow(lc2kdt(expr))$
                     k       i       j    k       j       i
(%t5)               a  kdelta  kdelta  - a  kdelta  kdelta
                     j       k       l    j       k       l
(%i6) ishow(contract(expand(%)))$
                                 i           i
(%t6)                           a  - a kdelta
                                 l           l

The lc2kdt function sometimes makes use of the metric tensor. If the metric tensor was not defined previously with imetric, this results in an error.


(%i7) expr:ishow('levi_civita([],[i,j])
                 *'levi_civita([],[k,l])*a([j,k],[]))$
                                 i j            k l
(%t7)                 levi_civita    levi_civita    a
                                                     j k
(%i8) ishow(lc2kdt(expr))$
Maxima encountered a Lisp error:

 Error in $IMETRIC [or a callee]:
 $IMETRIC [or a callee] requires less than two arguments.

Automatically continuing.
To reenable the Lisp debugger set *debugger-hook* to nil.
(%i9) imetric(g);
(%o9)                                done
(%i10) ishow(lc2kdt(expr))$
         %3 i       k   %4 j       l     %3 i       l   %4 j
(%t10) (g     kdelta   g     kdelta   - g     kdelta   g    
                    %3             %4               %3
              k
        kdelta  ) a
              %4   j k
(%i11) ishow(contract(expand(%)))$
                                  l i    l i  j
(%t11)                           a    - g    a
                                              j

Categories:  Package itensor

Function: lc_l

Simplification rule used for expressions containing the unevaluated Levi-Civita symbol (levi_civita). Along with `lc_u', it can be used to simplify many expressions more efficiently than the evaluation of levi_civita. For example:


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) el1:ishow('levi_civita([i,j,k],[])*a([],[i])*a([],[j]))$
                             i  j
(%t2)                       a  a  levi_civita
                                             i j k
(%i3) el2:ishow('levi_civita([],[i,j,k])*a([i])*a([j]))$
                                       i j k
(%t3)                       levi_civita      a  a
                                              i  j
(%i4) canform(contract(expand(applyb1(el1,lc_l,lc_u))));
(%t4)                                  0
(%i5) canform(contract(expand(applyb1(el2,lc_l,lc_u))));
(%t5)                                  0

Categories:  Package itensor

Function: lc_u

Simplification rule used for expressions containing the unevaluated Levi-Civita symbol (levi_civita). Along with lc_u, it can be used to simplify many expressions more efficiently than the evaluation of levi_civita. For details, see lc_l.

Categories:  Package itensor

Function: canten (expr)

Simplifies expr by renaming (see rename) and permuting dummy indices. rename is restricted to sums of tensor products in which no derivatives are present. As such it is limited and should only be used if canform is not capable of carrying out the required simplification.

The canten function returns a mathematically correct result only if its argument is an expression that is fully symmetric in its indices. For this reason, canten returns an error if allsym is not set to true.

Categories:  Package itensor

Function: concan (expr)

Similar to canten but also performs index contraction.

Categories:  Package itensor

25.2.2 Tensor symmetries

Option variable: allsym

Default value: false

If true then all indexed objects are assumed symmetric in all of their covariant and contravariant indices. If false then no symmetries of any kind are assumed in these indices. Derivative indices are always taken to be symmetric unless iframe_flag is set to true.

Categories:  Package itensor

Function: decsym (tensor, m, n, [cov_1, cov_2, ...], [contr_1, contr_2, ...])

Declares symmetry properties for tensor of m covariant and n contravariant indices. The cov_i and contr_i are pseudofunctions expressing symmetry relations among the covariant and contravariant indices respectively. These are of the form symoper(index_1, index_2,...) where symoper is one of sym, anti or cyc and the index_i are integers indicating the position of the index in the tensor. This will declare tensor to be symmetric, antisymmetric or cyclic respectively in the index_i. symoper(all) is also an allowable form which indicates all indices obey the symmetry condition. For example, given an object b with 5 covariant indices, decsym(b,5,3,[sym(1,2),anti(3,4)],[cyc(all)]) declares b symmetric in its first and second and antisymmetric in its third and fourth covariant indices, and cyclic in all of its contravariant indices. Either list of symmetry declarations may be null. The function which performs the simplifications is canform as the example below illustrates.


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) expr:contract( expand( a([i1, j1, k1], [])
           *kdels([i, j, k], [i1, j1, k1])))$
(%i3) ishow(expr)$
(%t3)         a      + a      + a      + a      + a      + a
               k j i    k i j    j k i    j i k    i k j    i j k
(%i4) decsym(a,3,0,[sym(all)],[]);
(%o4)                                done
(%i5) ishow(canform(expr))$
(%t5)                              6 a
                                      i j k
(%i6) remsym(a,3,0);
(%o6)                                done
(%i7) decsym(a,3,0,[anti(all)],[]);
(%o7)                                done
(%i8) ishow(canform(expr))$
(%t8)                                  0
(%i9) remsym(a,3,0);
(%o9)                                done
(%i10) decsym(a,3,0,[cyc(all)],[]);
(%o10)                               done
(%i11) ishow(canform(expr))$
(%t11)                        3 a      + 3 a
                                 i k j      i j k
(%i12) dispsym(a,3,0);
(%o12)                     [[cyc, [[1, 2, 3]], []]]

Categories:  Package itensor

Function: remsym (tensor, m, n)

Removes all symmetry properties from tensor which has m covariant indices and n contravariant indices.

Categories:  Package itensor

Function: canform
    canform (expr)
    canform (expr, rename)

Simplifies expr by renaming dummy indices and reordering all indices as dictated by symmetry conditions imposed on them. If allsym is true then all indices are assumed symmetric, otherwise symmetry information provided by decsym declarations will be used. The dummy indices are renamed in the same manner as in the rename function. When canform is applied to a large expression the calculation may take a considerable amount of time. This time can be shortened by calling rename on the expression first. Also see the example under decsym. Note: canform may not be able to reduce an expression completely to its simplest form although it will always return a mathematically correct result.

The optional second parameter rename, if set to false, suppresses renaming.

Categories:  Package itensor

25.2.3 Indicial tensor calculus

Function: diff (expr, v_1, [n_1, [v_2, n_2] ...])

is the usual Maxima differentiation function which has been expanded in its abilities for itensor. It takes the derivative of expr with respect to v_1 n_1 times, with respect to v_2 n_2 times, etc. For the tensor package, the function has been modified so that the v_i may be integers from 1 up to the value of the variable dim. This will cause the differentiation to be carried out with respect to the v_ith member of the list vect_coords. If vect_coords is bound to an atomic variable, then that variable subscripted by v_i will be used for the variable of differentiation. This permits an array of coordinate names or subscripted names like x[1], x[2], ... to be used.

A further extension adds the ability to diff to compute derivatives with respect to an indexed variable. In particular, the tensor package knows how to differentiate expressions containing combinations of the metric tensor and its derivatives with respect to the metric tensor and its first and second derivatives. This capability is particularly useful when considering Lagrangian formulations of a gravitational theory, allowing one to derive the Einstein tensor and field equations from the action principle.

Categories:  Package itensor

Function: idiff (expr, v_1, [n_1, [v_2, n_2] ...])

Indicial differentiation. Unlike diff, which differentiates with respect to an independent variable, idiff) can be used to differentiate with respect to a coordinate. For an indexed object, this amounts to appending the v_i as derivative indices. Subsequently, derivative indices will be sorted, unless iframe_flag is set to true.

idiff can also differentiate the determinant of the metric tensor. Thus, if imetric has been bound to G then idiff(determinant(g),k) will return 2 * determinant(g) * ichr2([%i,k],[%i]) where the dummy index %i is chosen appropriately.

Categories:  Package itensor

Function: liediff (v, ten)

Computes the Lie-derivative of the tensorial expression ten with respect to the vector field v. ten should be any indexed tensor expression; v should be the name (without indices) of a vector field. For example:


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) ishow(liediff(v,a([i,j],[])*b([],[k],l)))$
       k    %2            %2          %2
(%t2) b   (v   a       + v   a     + v   a    )
       ,l       i j,%2    ,j  i %2    ,i  %2 j

                          %1  k        %1  k      %1  k
                      + (v   b      - b   v    + v   b   ) a
                              ,%1 l    ,l  ,%1    ,l  ,%1   i j

Categories:  Package itensor

Function: rediff (ten)

Evaluates all occurrences of the idiff command in the tensorial expression ten.

Categories:  Package itensor

Function: undiff (expr)

Returns an expression equivalent to expr but with all derivatives of indexed objects replaced by the noun form of the idiff function. Its arguments would yield that indexed object if the differentiation were carried out. This is useful when it is desired to replace a differentiated indexed object with some function definition resulting in expr and then carry out the differentiation by saying ev(expr, idiff).

Categories:  Package itensor

Function: evundiff (expr)

Equivalent to the execution of undiff, followed by ev and rediff.

The point of this operation is to easily evalute expressions that cannot be directly evaluated in derivative form. For instance, the following causes an error:

(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) icurvature([i,j,k],[l],m);
Maxima encountered a Lisp error:

 Error in $ICURVATURE [or a callee]:
 $ICURVATURE [or a callee] requires less than three arguments.

Automatically continuing.
To reenable the Lisp debugger set *debugger-hook* to nil.

However, if icurvature is entered in noun form, it can be evaluated using evundiff:

(%i3) ishow('icurvature([i,j,k],[l],m))$
                                         l
(%t3)                          icurvature
                                         i j k,m
(%i4) ishow(evundiff(%))$
             l              l         %1           l           %1
(%t4) - ichr2        - ichr2     ichr2      - ichr2       ichr2
             i k,j m        %1 j      i k,m        %1 j,m      i k

             l              l         %1           l           %1
      + ichr2        + ichr2     ichr2      + ichr2       ichr2
             i j,k m        %1 k      i j,m        %1 k,m      i j

Note: In earlier versions of Maxima, derivative forms of the Christoffel-symbols also could not be evaluated. This has been fixed now, so evundiff is no longer necessary for expressions like this:

(%i5) imetric(g);
(%o5)                                done
(%i6) ishow(ichr2([i,j],[k],l))$
       k %3
      g     (g         - g         + g        )
              j %3,i l    i j,%3 l    i %3,j l
(%t6) -----------------------------------------
                          2

                         k %3
                        g     (g       - g       + g      )
                         ,l     j %3,i    i j,%3    i %3,j
                      + -----------------------------------
                                         2

Categories:  Package itensor

Function: flush (expr, tensor_1, tensor_2, ...)

Set to zero, in expr, all occurrences of the tensor_i that have no derivative indices.

Categories:  Package itensor

Function: flushd (expr, tensor_1, tensor_2, ...)

Set to zero, in expr, all occurrences of the tensor_i that have derivative indices.

Categories:  Package itensor

Function: flushnd (expr, tensor, n)

Set to zero, in expr, all occurrences of the differentiated object tensor that have n or more derivative indices as the following example demonstrates.


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) ishow(a([i],[J,r],k,r)+a([i],[j,r,s],k,r,s))$
                                J r      j r s
(%t2)                          a      + a
                                i,k r    i,k r s
(%i3) ishow(flushnd(%,a,3))$
                                     J r
(%t3)                               a
                                     i,k r

Categories:  Package itensor

Function: coord (tensor_1, tensor_2, ...)

Gives tensor_i the coordinate differentiation property that the derivative of contravariant vector whose name is one of the tensor_i yields a Kronecker delta. For example, if coord(x) has been done then idiff(x([],[i]),j) gives kdelta([i],[j]). coord is a list of all indexed objects having this property.

Categories:  Package itensor

Function: remcoord
    remcoord (tensor_1, tensor_2, ...)
    remcoord (all)

Removes the coordinate differentiation property from the tensor_i that was established by the function coord. remcoord(all) removes this property from all indexed objects.

Categories:  Package itensor

Function: makebox (expr)

Display expr in the same manner as show; however, any tensor d’Alembertian occurring in expr will be indicated using the symbol []. For example, []p([m],[n]) represents g([],[i,j])*p([m],[n],i,j).

Categories:  Package itensor

Function: conmetderiv (expr, tensor)

Simplifies expressions containing ordinary derivatives of both covariant and contravariant forms of the metric tensor (the current restriction). For example, conmetderiv can relate the derivative of the contravariant metric tensor with the Christoffel symbols as seen from the following:


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) ishow(g([],[a,b],c))$
                                      a b
(%t2)                                g
                                      ,c
(%i3) ishow(conmetderiv(%,g))$
                         %1 b      a       %1 a      b
(%t3)                 - g     ichr2     - g     ichr2
                                   %1 c              %1 c

Categories:  Package itensor

Function: simpmetderiv
    simpmetderiv (expr)
    simpmetderiv (expr[, stop])

Simplifies expressions containing products of the derivatives of the metric tensor. Specifically, simpmetderiv recognizes two identities:


   ab        ab           ab                 a
  g   g   + g   g     = (g   g  )   = (kdelta )   = 0
   ,d  bc        bc,d         bc ,d          c ,d

hence


   ab          ab
  g   g   = - g   g
   ,d  bc          bc,d

and


  ab          ab
 g   g     = g   g
  ,j  ab,i    ,i  ab,j

which follows from the symmetries of the Christoffel symbols.

The simpmetderiv function takes one optional parameter which, when present, causes the function to stop after the first successful substitution in a product expression. The simpmetderiv function also makes use of the global variable flipflag which determines how to apply a “canonical” ordering to the product indices.

Put together, these capabilities can be used to achieve powerful simplifications that are difficult or impossible to accomplish otherwise. This is demonstrated through the following example that explicitly uses the partial simplification features of simpmetderiv to obtain a contractible expression:


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) imetric(g);
(%o2)                                done
(%i3) ishow(g([],[a,b])*g([],[b,c])*g([a,b],[],d)*g([b,c],[],e))$
                             a b  b c
(%t3)                       g    g    g      g
                                       a b,d  b c,e
(%i4) ishow(canform(%))$

errexp1 has improper indices
 -- an error.  Quitting.  To debug this try debugmode(true);
(%i5) ishow(simpmetderiv(%))$
                             a b  b c
(%t5)                       g    g    g      g
                                       a b,d  b c,e
(%i6) flipflag:not flipflag;
(%o6)                                true
(%i7) ishow(simpmetderiv(%th(2)))$
                               a b  b c
(%t7)                         g    g    g    g
                               ,d   ,e   a b  b c
(%i8) flipflag:not flipflag;
(%o8)                                false
(%i9) ishow(simpmetderiv(%th(2),stop))$
                               a b  b c
(%t9)                       - g    g    g      g
                                    ,e   a b,d  b c
(%i10) ishow(contract(%))$
                                    b c
(%t10)                           - g    g
                                    ,e   c b,d

See also weyl.dem for an example that uses simpmetderiv and conmetderiv together to simplify contractions of the Weyl tensor.

Categories:  Package itensor

Function: flush1deriv (expr, tensor)

Set to zero, in expr, all occurrences of tensor that have exactly one derivative index.

Categories:  Package itensor

25.2.4 Tensors in curved spaces

Function: imetric (g)
System variable: imetric

Specifies the metric by assigning the variable imetric:g in addition, the contraction properties of the metric g are set up by executing the commands defcon(g), defcon(g, g, kdelta). The variable imetric (unbound by default), is bound to the metric, assigned by the imetric(g) command.

Categories:  Package itensor

Function: idim (n)

Sets the dimensions of the metric. Also initializes the antisymmetry properties of the Levi-Civita symbols for the given dimension.

Categories:  Package itensor

Function: ichr1 ([i, j, k])

Yields the Christoffel symbol of the first kind via the definition

       (g      + g      - g     )/2 .
         ik,j     jk,i     ij,k

To evaluate the Christoffel symbols for a particular metric, the variable imetric must be assigned a name as in the example under chr2.

Categories:  Package itensor

Function: ichr2 ([i, j], [k])

Yields the Christoffel symbol of the second kind defined by the relation

                       ks
   ichr2([i,j],[k]) = g    (g      + g      - g     )/2
                             is,j     js,i     ij,s

Categories:  Package itensor

Function: icurvature ([i, j, k], [h])

Yields the Riemann curvature tensor in terms of the Christoffel symbols of the second kind (ichr2). The following notation is used:

            h             h            h         %1         h
  icurvature     = - ichr2      - ichr2     ichr2    + ichr2
            i j k         i k,j        %1 j      i k        i j,k
                            h          %1
                     + ichr2      ichr2
                            %1 k       i j

Categories:  Package itensor

Function: covdiff (expr, v_1, v_2, ...)

Yields the covariant derivative of expr with respect to the variables v_i in terms of the Christoffel symbols of the second kind (ichr2). In order to evaluate these, one should use ev(expr,ichr2).


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) entertensor()$
Enter tensor name: a;
Enter a list of the covariant indices: [i,j];
Enter a list of the contravariant indices: [k];
Enter a list of the derivative indices: [];
                                      k
(%t2)                                a
                                      i j
(%i3) ishow(covdiff(%,s))$
             k         %1     k         %1     k
(%t3)     - a     ichr2    - a     ichr2    + a
             i %1      j s    %1 j      i s    i j,s

             k     %1
      + ichr2     a
             %1 s  i j
(%i4) imetric:g;
(%o4)                                  g
(%i5) ishow(ev(%th(2),ichr2))$
         %1 %4  k
        g      a     (g       - g       + g      )
                i %1   s %4,j    j s,%4    j %4,s
(%t5) - ------------------------------------------
                            2
    %1 %3  k
   g      a     (g       - g       + g      )
           %1 j   s %3,i    i s,%3    i %3,s
 - ------------------------------------------
                       2
    k %2  %1
   g     a    (g        - g        + g       )
          i j   s %2,%1    %1 s,%2    %1 %2,s     k
 + ------------------------------------------- + a
                        2                         i j,s
(%i6)

Categories:  Package itensor

Function: lorentz_gauge (expr)

Imposes the Lorentz condition by substituting 0 for all indexed objects in expr that have a derivative index identical to a contravariant index.

Categories:  Package itensor

Function: igeodesic_coords (expr, name)

Causes undifferentiated Christoffel symbols and first derivatives of the metric tensor vanish in expr. The name in the `igeodesic_coords' function refers to the metric name (if it appears in expr) while the connection coefficients must be called with the names ichr1 and/or ichr2. The following example demonstrates the verification of the cyclic identity satisfied by the Riemann curvature tensor using the igeodesic_coords function.


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) ishow(icurvature([r,s,t],[u]))$
             u            u         %1         u     
(%t2) - ichr2      - ichr2     ichr2    + ichr2      
             r t,s        %1 s      r t        r s,t 

                                              u         %1
                                       + ichr2     ichr2
                                              %1 t      r s
(%i3) ishow(igeodesic_coords(%,ichr2))$
                                 u            u
(%t3)                       ichr2      - ichr2
                                 r s,t        r t,s
(%i4) ishow(igeodesic_coords(icurvature([r,s,t],[u]),ichr2)+
            igeodesic_coords(icurvature([s,t,r],[u]),ichr2)+
            igeodesic_coords(icurvature([t,r,s],[u]),ichr2))$
             u            u            u            u
(%t4) - ichr2      + ichr2      + ichr2      - ichr2
             t s,r        t r,s        s t,r        s r,t

                                             u            u
                                      - ichr2      + ichr2
                                             r t,s        r s,t
(%i5) canform(%);
(%o5)                                  0

Categories:  Package itensor

25.2.5 Moving frames

Maxima now has the ability to perform calculations using moving frames. These can be orthonormal frames (tetrads, vielbeins) or an arbitrary frame.

To use frames, you must first set iframe_flag to true. This causes the Christoffel-symbols, ichr1 and ichr2, to be replaced by the more general frame connection coefficients icc1 and icc2 in calculations. Speficially, the behavior of covdiff and icurvature is changed.

The frame is defined by two tensors: the inverse frame field (ifri, the dual basis tetrad), and the frame metric ifg. The frame metric is the identity matrix for orthonormal frames, or the Lorentz metric for orthonormal frames in Minkowski spacetime. The inverse frame field defines the frame base (unit vectors). Contraction properties are defined for the frame field and the frame metric.

When iframe_flag is true, many itensor expressions use the frame metric ifg instead of the metric defined by imetric for raising and lowerind indices.

IMPORTANT: Setting the variable iframe_flag to true does NOT undefine the contraction properties of a metric defined by a call to defcon or imetric. If a frame field is used, it is best to define the metric by assigning its name to the variable imetric and NOT invoke the imetric function.

Maxima uses these two tensors to define the frame coefficients (ifc1 and ifc2) which form part of the connection coefficients (icc1 and icc2), as the following example demonstrates:


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) iframe_flag:true;
(%o2)                                true
(%i3) ishow(covdiff(v([],[i]),j))$
                               i        i     %1
(%t3)                         v   + icc2     v
                               ,j       %1 j
(%i4) ishow(ev(%,icc2))$
                               %1     i       i
(%t4)                         v   ifc2     + v
                                      %1 j    ,j
(%i5) ishow(ev(%,ifc2))$
                          %1    i %2                i
(%t5)                    v   ifg     ifc1        + v
                                         %1 j %2    ,j
(%i6) ishow(ev(%,ifc1))$
            %1    i %2
           v   ifg     (ifb        - ifb        + ifb       )
                           j %2 %1      %2 %1 j      %1 j %2     i
(%t6)      -------------------------------------------------- + v
                                   2                             ,j
(%i7) ishow(ifb([a,b,c]))$
                                                   %3    %4
(%t7)               (ifri        - ifri       ) ifr   ifr
                         a %3,%4       a %4,%3     b     c

An alternate method is used to compute the frame bracket (ifb) if the iframe_bracket_form flag is set to false:


(%i8) block([iframe_bracket_form:false],ishow(ifb([a,b,c])))$
                                %6    %5        %5      %6
(%t8)              ifri     (ifr   ifr     - ifr     ifr  )
                       a %5     b     c,%6      b,%6    c

Function: iframes ()

Since in this version of Maxima, contraction identities for ifr and ifri are always defined, as is the frame bracket (ifb), this function does nothing.

Categories:  Package itensor

Variable: ifb

The frame bracket. The contribution of the frame metric to the connection coefficients is expressed using the frame bracket:


          - ifb      + ifb      + ifb
               c a b      b c a      a b c
ifc1    = --------------------------------
    abc                  2

The frame bracket itself is defined in terms of the frame field and frame metric. Two alternate methods of computation are used depending on the value of frame_bracket_form. If true (the default) or if the itorsion_flag is true:


          d      e                                      f
ifb =  ifr    ifr   (ifri      - ifri      - ifri    itr   )
   abc    b      c       a d,e       a e,d       a f    d e


Otherwise:


             e      d        d      e
ifb    = (ifr    ifr    - ifr    ifr   ) ifri
   abc       b      c,e      b,e    c        a d

Categories:  Package itensor

Variable: icc1

Connection coefficients of the first kind. In itensor, defined as


icc1    = ichr1    - ikt1    - inmc1
    abc        abc       abc        abc

In this expression, if iframe_flag is true, the Christoffel-symbol ichr1 is replaced with the frame connection coefficient ifc1. If itorsion_flag is false, ikt1 will be omitted. It is also omitted if a frame base is used, as the torsion is already calculated as part of the frame bracket. Lastly, of inonmet_flag is false, inmc1 will not be present.

Categories:  Package itensor

Variable: icc2

Connection coefficients of the second kind. In itensor, defined as


    c         c        c         c
icc2   = ichr2   - ikt2   - inmc2
    ab        ab       ab        ab

In this expression, if iframe_flag is true, the Christoffel-symbol ichr2 is replaced with the frame connection coefficient ifc2. If itorsion_flag is false, ikt2 will be omitted. It is also omitted if a frame base is used, as the torsion is already calculated as part of the frame bracket. Lastly, of inonmet_flag is false, inmc2 will not be present.

Categories:  Package itensor

Variable: ifc1

Frame coefficient of the first kind (also known as Ricci-rotation coefficients.) This tensor represents the contribution of the frame metric to the connection coefficient of the first kind. Defined as:


          - ifb      + ifb      + ifb
               c a b      b c a      a b c
ifc1    = --------------------------------
    abc                   2


Categories:  Package itensor

Variable: ifc2

Frame coefficient of the second kind. This tensor represents the contribution of the frame metric to the connection coefficient of the second kind. Defined as a permutation of the frame bracket (ifb) with the appropriate indices raised and lowered as necessary:


    c       cd
ifc2   = ifg   ifc1
    ab             abd

Categories:  Package itensor

Variable: ifr

The frame field. Contracts with the inverse frame field (ifri) to form the frame metric (ifg).

Categories:  Package itensor

Variable: ifri

The inverse frame field. Specifies the frame base (dual basis vectors). Along with the frame metric, it forms the basis of all calculations based on frames.

Categories:  Package itensor

Variable: ifg

The frame metric. Defaults to kdelta, but can be changed using components.

Categories:  Package itensor

Variable: ifgi

The inverse frame metric. Contracts with the frame metric (ifg) to kdelta.

Categories:  Package itensor

Option variable: iframe_bracket_form

Default value: true

Specifies how the frame bracket (ifb) is computed.

Categories:  Package itensor

25.2.6 Torsion and nonmetricity

Maxima can now take into account torsion and nonmetricity. When the flag itorsion_flag is set to true, the contribution of torsion is added to the connection coefficients. Similarly, when the flag inonmet_flag is true, nonmetricity components are included.

Variable: inm

The nonmetricity vector. Conformal nonmetricity is defined through the covariant derivative of the metric tensor. Normally zero, the metric tensor’s covariant derivative will evaluate to the following when inonmet_flag is set to true:


g     =- g  inm
 ij;k     ij   k

Categories:  Package itensor

Variable: inmc1

Covariant permutation of the nonmetricity vector components. Defined as


           g   inm  - inm  g   - g   inm
            ab    c      a  bc    ac    b
inmc1    = ------------------------------
     abc                 2

(Substitute ifg in place of g if a frame metric is used.)

Categories:  Package itensor

Variable: inmc2

Contravariant permutation of the nonmetricity vector components. Used in the connection coefficients if inonmet_flag is true. Defined as:


                      c         c         cd
          -inm  kdelta  - kdelta  inm  + g   inm  g
     c        a       b         a    b          d  ab
inmc2   = -------------------------------------------
     ab                        2

(Substitute ifg in place of g if a frame metric is used.)

Categories:  Package itensor

Variable: ikt1

Covariant permutation of the torsion tensor (also known as contorsion). Defined as:


                  d           d       d
          -g   itr  - g    itr   - itr   g
            ad    cb    bd    ca      ab  cd
ikt1    = ----------------------------------
    abc                   2

(Substitute ifg in place of g if a frame metric is used.)

Categories:  Package itensor

Variable: ikt2

Contravariant permutation of the torsion tensor (also known as contorsion). Defined as:


    c     cd
ikt2   = g   ikt1
    ab           abd

(Substitute ifg in place of g if a frame metric is used.)

Categories:  Package itensor

Variable: itr

The torsion tensor. For a metric with torsion, repeated covariant differentiation on a scalar function will not commute, as demonstrated by the following example:


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) imetric:g;
(%o2)                                  g
(%i3) covdiff( covdiff( f( [], []), i), j)
                      - covdiff( covdiff( f( [], []), j), i)$
(%i4) ishow(%)$
                                   %4              %2
(%t4)                    f    ichr2    - f    ichr2
                          ,%4      j i    ,%2      i j
(%i5) canform(%);
(%o5)                                  0
(%i6) itorsion_flag:true;
(%o6)                                true
(%i7) covdiff( covdiff( f( [], []), i), j)
                      - covdiff( covdiff( f( [], []), j), i)$
(%i8) ishow(%)$
                           %8             %6
(%t8)             f    icc2    - f    icc2    - f     + f
                   ,%8     j i    ,%6     i j    ,j i    ,i j
(%i9) ishow(canform(%))$
                                   %1             %1
(%t9)                     f    icc2    - f    icc2
                           ,%1     j i    ,%1     i j
(%i10) ishow(canform(ev(%,icc2)))$
                                   %1             %1
(%t10)                    f    ikt2    - f    ikt2
                           ,%1     i j    ,%1     j i
(%i11) ishow(canform(ev(%,ikt2)))$
                      %2 %1                    %2 %1
(%t11)          f    g      ikt1       - f    g      ikt1
                 ,%2            i j %1    ,%2            j i %1
(%i12) ishow(factor(canform(rename(expand(ev(%,ikt1))))))$
                           %3 %2            %1       %1
                     f    g      g      (itr    - itr   )
                      ,%3         %2 %1     j i      i j
(%t12)               ------------------------------------
                                      2
(%i13) decsym(itr,2,1,[anti(all)],[]);
(%o13)                               done
(%i14) defcon(g,g,kdelta);
(%o14)                               done
(%i15) subst(g,nounify(g),%th(3))$
(%i16) ishow(canform(contract(%)))$
                                           %1
(%t16)                           - f    itr
                                    ,%1    i j

Categories:  Package itensor

25.2.7 Exterior algebra

The itensor package can perform operations on totally antisymmetric covariant tensor fields. A totally antisymmetric tensor field of rank (0,L) corresponds with a differential L-form. On these objects, a multiplication operation known as the exterior product, or wedge product, is defined.

Unfortunately, not all authors agree on the definition of the wedge product. Some authors prefer a definition that corresponds with the notion of antisymmetrization: in these works, the wedge product of two vector fields, for instance, would be defined as

            a a  - a a
             i j    j i
 a  /\ a  = -----------
  i     j        2

More generally, the product of a p-form and a q-form would be defined as

                       1     k1..kp l1..lq
A       /\ B       = ------ D              A       B
 i1..ip     j1..jq   (p+q)!  i1..ip j1..jq  k1..kp  l1..lq

where D stands for the Kronecker-delta.

Other authors, however, prefer a “geometric” definition that corresponds with the notion of the volume element:

a  /\ a  = a a  - a a
 i     j    i j    j i

and, in the general case

                       1    k1..kp l1..lq
A       /\ B       = ----- D              A       B
 i1..ip     j1..jq   p! q!  i1..ip j1..jq  k1..kp  l1..lq

Since itensor is a tensor algebra package, the first of these two definitions appears to be the more natural one. Many applications, however, utilize the second definition. To resolve this dilemma, a flag has been implemented that controls the behavior of the wedge product: if igeowedge_flag is false (the default), the first, "tensorial" definition is used, otherwise the second, "geometric" definition will be applied.

Operator: ~

The wedge product operator is denoted by the tilde ~. This is a binary operator. Its arguments should be expressions involving scalars, covariant tensors of rank one, or covariant tensors of rank l that have been declared antisymmetric in all covariant indices.

The behavior of the wedge product operator is controlled by the igeowedge_flag flag, as in the following example:

(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) ishow(a([i])~b([j]))$
                                 a  b  - b  a
                                  i  j    i  j
(%t2)                            -------------
                                       2
(%i3) decsym(a,2,0,[anti(all)],[]);
(%o3)                                done
(%i4) ishow(a([i,j])~b([k]))$
                          a    b  + b  a    - a    b
                           i j  k    i  j k    i k  j
(%t4)                     ---------------------------
                                       3
(%i5) igeowedge_flag:true;
(%o5)                                true
(%i6) ishow(a([i])~b([j]))$
(%t6)                            a  b  - b  a
                                  i  j    i  j
(%i7) ishow(a([i,j])~b([k]))$
(%t7)                     a    b  + b  a    - a    b
                           i j  k    i  j k    i k  j

Categories:  Package itensor Operators

Operator: |

The vertical bar | denotes the "contraction with a vector" binary operation. When a totally antisymmetric covariant tensor is contracted with a contravariant vector, the result is the same regardless which index was used for the contraction. Thus, it is possible to define the contraction operation in an index-free manner.

In the itensor package, contraction with a vector is always carried out with respect to the first index in the literal sorting order. This ensures better simplification of expressions involving the | operator. For instance:

(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) decsym(a,2,0,[anti(all)],[]);
(%o2)                                done
(%i3) ishow(a([i,j],[])|v)$
                                    %1
(%t3)                              v   a
                                        %1 j
(%i4) ishow(a([j,i],[])|v)$
                                     %1
(%t4)                             - v   a
                                         %1 j

Note that it is essential that the tensors used with the | operator be declared totally antisymmetric in their covariant indices. Otherwise, the results will be incorrect.

Categories:  Package itensor Operators

Function: extdiff (expr, i)

Computes the exterior derivative of expr with respect to the index i. The exterior derivative is formally defined as the wedge product of the partial derivative operator and a differential form. As such, this operation is also controlled by the setting of igeowedge_flag. For instance:

(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) ishow(extdiff(v([i]),j))$
                                  v    - v
                                   j,i    i,j
(%t2)                             -----------
                                       2
(%i3) decsym(a,2,0,[anti(all)],[]);
(%o3)                                done
(%i4) ishow(extdiff(a([i,j]),k))$
                           a      - a      + a
                            j k,i    i k,j    i j,k
(%t4)                      ------------------------
                                      3
(%i5) igeowedge_flag:true;
(%o5)                                true
(%i6) ishow(extdiff(v([i]),j))$
(%t6)                             v    - v
                                   j,i    i,j
(%i7) ishow(extdiff(a([i,j]),k))$
(%t7)                    - (a      - a      + a     )
                             k j,i    k i,j    j i,k

Categories:  Package itensor

Function: hodge (expr)

Compute the Hodge-dual of expr. For instance:


(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) imetric(g);
(%o2)                            done
(%i3) idim(4);
(%o3)                            done
(%i4) icounter:100;
(%o4)                             100
(%i5) decsym(A,3,0,[anti(all)],[])$

(%i6) ishow(A([i,j,k],[]))$
(%t6)                           A
                                 i j k
(%i7) ishow(canform(hodge(%)))$
                          %1 %2 %3 %4
               levi_civita            g        A
                                       %1 %102  %2 %3 %4
(%t7)          -----------------------------------------
                                   6
(%i8) ishow(canform(hodge(%)))$
                 %1 %2 %3 %8            %4 %5 %6 %7
(%t8) levi_civita            levi_civita            g       
                                                     %1 %106
                             g        g        g      A         /6
                              %2 %107  %3 %108  %4 %8  %5 %6 %7
(%i9) lc2kdt(%)$

(%i10) %,kdelta$

(%i11) ishow(canform(contract(expand(%))))$
(%t11)                     - A
                              %106 %107 %108

Categories:  Package itensor

Option variable: igeowedge_flag

Default value: false

Controls the behavior of the wedge product and exterior derivative. When set to false (the default), the notion of differential forms will correspond with that of a totally antisymmetric covariant tensor field. When set to true, differential forms will agree with the notion of the volume element.

Categories:  Package itensor

25.2.8 Exporting TeX expressions

The itensor package provides limited support for exporting tensor expressions to TeX. Since itensor expressions appear as function calls, the regular Maxima tex command will not produce the expected output. You can try instead the tentex command, which attempts to translate tensor expressions into appropriately indexed TeX objects.

Function: tentex (expr)

To use the tentex function, you must first load tentex, as in the following example:

(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) load(tentex);
(%o2)       /share/tensor/tentex.lisp
(%i3) idummyx:m;
(%o3)                                  m
(%i4) ishow(icurvature([j,k,l],[i]))$
            m1       i           m1       i           i
(%t4)  ichr2    ichr2     - ichr2    ichr2     - ichr2
            j k      m1 l        j l      m1 k        j l,k

                                                      i
                                               + ichr2
                                                      j k,l
(%i5) tentex(%)$
$$\Gamma_{j\,k}^{m_1}\,\Gamma_{l\,m_1}^{i}-\Gamma_{j\,l}^{m_1}\,
 \Gamma_{k\,m_1}^{i}-\Gamma_{j\,l,k}^{i}+\Gamma_{j\,k,l}^{i}$$

Note the use of the idummyx assignment, to avoid the appearance of the percent sign in the TeX expression, which may lead to compile errors.

NB: This version of the tentex function is somewhat experimental.

Categories:  Package itensor TeX output

25.2.9 Interfacing with ctensor

The itensor package has the ability to generate Maxima code that can then be executed in the context of the ctensor package. The function that performs this task is ic_convert.

Function: ic_convert (eqn)

Converts the itensor equation eqn to a ctensor assignment statement. Implied sums over dummy indices are made explicit while indexed objects are transformed into arrays (the array subscripts are in the order of covariant followed by contravariant indices of the indexed objects). The derivative of an indexed object will be replaced by the noun form of diff taken with respect to ct_coords subscripted by the derivative index. The Christoffel symbols ichr1 and ichr2 will be translated to lcs and mcs, respectively and if metricconvert is true then all occurrences of the metric with two covariant (contravariant) indices will be renamed to lg (ug). In addition, do loops will be introduced summing over all free indices so that the transformed assignment statement can be evaluated by just doing ev. The following examples demonstrate the features of this function.

(%i1) load("itensor");
(%o1)      /share/tensor/itensor.lisp
(%i2) eqn:ishow(t([i,j],[k])=f([],[])*g([l,m],[])*a([],[m],j)
      *b([i],[l,k]))$
                             k        m   l k
(%t2)                       t    = f a   b    g
                             i j      ,j  i    l m
(%i3) ic_convert(eqn);
(%o3) for i thru dim do (for j thru dim do (
       for k thru dim do
        t        : f sum(sum(diff(a , ct_coords ) b
         i, j, k                   m           j   i, l, k

 g    , l, 1, dim), m, 1, dim)))
  l, m
(%i4) imetric(g);
(%o4)                                done
(%i5) metricconvert:true;
(%o5)                                true
(%i6) ic_convert(eqn);
(%o6) for i thru dim do (for j thru dim do (
       for k thru dim do
        t        : f sum(sum(diff(a , ct_coords ) b
         i, j, k                   m           j   i, l, k

 lg    , l, 1, dim), m, 1, dim)))
   l, m

25.2.10 Reserved words

The following Maxima words are used by the itensor package internally and should not be redefined:

  Keyword    Comments
  ------------------------------------------
  indices2() Internal version of indices()
  conti      Lists contravariant indices
  covi       Lists covariant indices of a indexed object
  deri       Lists derivative indices of an indexed object
  name       Returns the name of an indexed object
  concan
  irpmon
  lc0
  _lc2kdt0
  _lcprod
  _extlc

Previous: , Up: itensor   [Contents][Index]