Next: , Previous:   [Contents][Index]

20 Equations


Previous: , Up: Equations   [Contents][Index]

20.1 Functions and Variables for Equations

System variable: %rnum

Default value: 0

%rnum is the counter for the %r variables introduced in solutions by solve and algsys.. The next %r variable is numbered %rnum+1.

See also %rnum_list.

Categories: Algebraic equations ·
System variable: %rnum_list

Default value: []

%rnum_list is the list of variables introduced in solutions by solve and algsys. %r variables are added to %rnum_list in the order they are created. This is convenient for doing substitutions into the solution later on.

See also %rnum.

It’s recommended to use this list rather than doing concat ('%r, j).

(%i1) solve ([x + y = 3], [x,y]);
(%o1)              [[x = 3 - %r1, y = %r1]]
(%i2) %rnum_list;
(%o2)                       [%r1]
(%i3) sol : solve ([x + 2*y + 3*z = 4], [x,y,z]);
(%o3)   [[x = - 2 %r3 - 3 %r2 + 4, y = %r3, z = %r2]]
(%i4) %rnum_list;
(%o4)                     [%r2, %r3]
(%i5) for i : 1 thru length (%rnum_list) do
        sol : subst (t[i], %rnum_list[i], sol)$
(%i6) sol;
(%o6)     [[x = - 2 t  - 3 t  + 4, y = t , z = t ]]
                     2      1           2       1
Categories: Algebraic equations ·
Option variable: algepsilon

Default value: 10^8

algepsilon is used by algsys.

Categories: Algebraic equations ·
Option variable: algexact

Default value: false

algexact affects the behavior of algsys as follows:

If algexact is true, algsys always calls solve and then uses realroots on solve’s failures.

If algexact is false, solve is called only if the eliminant was not univariate, or if it was a quadratic or biquadratic.

Thus algexact: true does not guarantee only exact solutions, just that algsys will first try as hard as it can to give exact solutions, and only yield approximations when all else fails.

Categories: Algebraic equations ·
Function: algsys
    algsys ([expr_1, …, expr_m], [x_1, …, x_n])
    algsys ([eqn_1, …, eqn_m], [x_1, …, x_n])

Solves the simultaneous polynomials expr_1, …, expr_m or polynomial equations eqn_1, …, eqn_m for the variables x_1, …, x_n. An expression expr is equivalent to an equation expr = 0. There may be more equations than variables or vice versa.

algsys returns a list of solutions, with each solution given as a list of equations stating values of the variables x_1, …, x_n which satisfy the system of equations. If algsys cannot find a solution, an empty list [] is returned.

The symbols %r1, %r2, …, are introduced as needed to represent arbitrary parameters in the solution; these variables are also appended to the list %rnum_list.

The method is as follows:

  1. First the equations are factored and split into subsystems.
  2. For each subsystem S_i, an equation E and a variable x are selected. The variable is chosen to have lowest nonzero degree. Then the resultant of E and E_j with respect to x is computed for each of the remaining equations E_j in the subsystem S_i. This yields a new subsystem S_i’ in one fewer variables, as x has been eliminated. The process now returns to (1).
  3. Eventually, a subsystem consisting of a single equation is obtained. If the equation is multivariate and no approximations in the form of floating point numbers have been introduced, then solve is called to find an exact solution.

    In some cases, solve is not be able to find a solution, or if it does the solution may be a very large expression.

    If the equation is univariate and is either linear, quadratic, or biquadratic, then again solve is called if no approximations have been introduced. If approximations have been introduced or the equation is not univariate and neither linear, quadratic, or biquadratic, then if the switch realonly is true, the function realroots is called to find the real-valued solutions. If realonly is false, then allroots is called which looks for real and complex-valued solutions.

    If algsys produces a solution which has fewer significant digits than required, the user can change the value of algepsilon to a higher value.

    If algexact is set to true, solve will always be called.

  4. Finally, the solutions obtained in step (3) are substituted into previous levels and the solution process returns to (1).

When algsys encounters a multivariate equation which contains floating point approximations (usually due to its failing to find exact solutions at an earlier stage), then it does not attempt to apply exact methods to such equations and instead prints the message: "algsys cannot solve - system too complicated."

Interactions with radcan can produce large or complicated expressions. In that case, it may be possible to isolate parts of the result with pickapart or reveal.

Occasionally, radcan may introduce an imaginary unit %i into a solution which is actually real-valued.

Examples:

(%i1) e1: 2*x*(1 - a1) - 2*(x - 1)*a2;
(%o1)              2 (1 - a1) x - 2 a2 (x - 1)
(%i2) e2: a2 - a1; 
(%o2)                        a2 - a1
(%i3) e3: a1*(-y - x^2 + 1); 
                                   2
(%o3)                   a1 (- y - x  + 1)
(%i4) e4: a2*(y - (x - 1)^2);
                                       2
(%o4)                   a2 (y - (x - 1) )
(%i5) algsys ([e1, e2, e3, e4], [x, y, a1, a2]);
(%o5) [[x = 0, y = %r1, a1 = 0, a2 = 0], 

                                  [x = 1, y = 0, a1 = 1, a2 = 1]]
(%i6) e1: x^2 - y^2;
                              2    2
(%o6)                        x  - y
(%i7) e2: -1 - y + 2*y^2 - x + x^2;
                         2        2
(%o7)                 2 y  - y + x  - x - 1
(%i8) algsys ([e1, e2], [x, y]);
                 1            1
(%o8) [[x = - -------, y = -------], 
              sqrt(3)      sqrt(3)

        1              1             1        1
[x = -------, y = - -------], [x = - -, y = - -], [x = 1, y = 1]]
     sqrt(3)        sqrt(3)          3        3
Categories: Algebraic equations ·
Function: allroots
    allroots (expr)
    allroots (eqn)

Computes numerical approximations of the real and complex roots of the polynomial expr or polynomial equation eqn of one variable.

The flag polyfactor when true causes allroots to factor the polynomial over the real numbers if the polynomial is real, or over the complex numbers, if the polynomial is complex.

allroots may give inaccurate results in case of multiple roots. If the polynomial is real, allroots (%i*p) may yield more accurate approximations than allroots (p), as allroots invokes a different algorithm in that case.

allroots rejects non-polynomials. It requires that the numerator after rat’ing should be a polynomial, and it requires that the denominator be at most a complex number. As a result of this allroots will always return an equivalent (but factored) expression, if polyfactor is true.

For complex polynomials an algorithm by Jenkins and Traub is used (Algorithm 419, Comm. ACM, vol. 15, (1972), p. 97). For real polynomials the algorithm used is due to Jenkins (Algorithm 493, ACM TOMS, vol. 1, (1975), p.178).

Examples:

(%i1) eqn: (1 + 2*x)^3 = 13.5*(1 + x^5);
                            3          5
(%o1)              (2 x + 1)  = 13.5 (x  + 1)
(%i2) soln: allroots (eqn);
(%o2) [x = .8296749902129361, x = - 1.015755543828121, 

x = .9659625152196369 %i - .4069597231924075, 

x = - .9659625152196369 %i - .4069597231924075, x = 1.0]
(%i3) for e in soln
        do (e2: subst (e, eqn), disp (expand (lhs(e2) - rhs(e2))));
                      - 3.5527136788005E-15

                     - 5.32907051820075E-15

         4.44089209850063E-15 %i - 4.88498130835069E-15

        - 4.44089209850063E-15 %i - 4.88498130835069E-15

                       3.5527136788005E-15

(%o3)                         done
(%i4) polyfactor: true$
(%i5) allroots (eqn);
(%o5) - 13.5 (x - 1.0) (x - .8296749902129361)

                           2
 (x + 1.015755543828121) (x  + .8139194463848151 x

 + 1.098699797110288)
Categories: Polynomials · Numerical methods ·
Function: bfallroots
    bfallroots (expr)
    bfallroots (eqn)

Computes numerical approximations of the real and complex roots of the polynomial expr or polynomial equation eqn of one variable.

In all respects, bfallroots is identical to allroots except that bfallroots computes the roots using bigfloats. See allroots for more information.

Categories: Polynomials · Numerical methods ·
Option variable: backsubst

Default value: true

When backsubst is false, prevents back substitution in linsolve after the equations have been triangularized. This may be helpful in very big problems where back substitution would cause the generation of extremely large expressions.

(%i1) eq1 : x + y + z = 6$
(%i2) eq2 : x - y + z = 2$
(%i3) eq3 : x + y - z = 0$
(%i4) backsubst : false$
(%i5) linsolve ([eq1, eq2, eq3], [x,y,z]);
(%o5)             [x = z - y, y = 2, z = 3]
(%i6) backsubst : true$
(%i7) linsolve ([eq1, eq2, eq3], [x,y,z]);
(%o7)               [x = 1, y = 2, z = 3]
Categories: Algebraic equations ·
Option variable: breakup

Default value: true

When breakup is true, solve expresses solutions of cubic and quartic equations in terms of common subexpressions, which are assigned to intermediate expression labels (%t1, %t2, etc.). Otherwise, common subexpressions are not identified.

breakup: true has an effect only when programmode is false.

Examples:

(%i1) programmode: false$
(%i2) breakup: true$
(%i3) solve (x^3 + x^2 - 1);

                        sqrt(23)    25 1/3
(%t3)                  (--------- + --)
                        6 sqrt(3)   54
Solution:

                                      sqrt(3) %i   1
                                      ---------- - -
                sqrt(3) %i   1            2        2   1
(%t4)    x = (- ---------- - -) %t3 + -------------- - -
                    2        2            9 %t3        3

                                      sqrt(3) %i   1
                                    - ---------- - -
              sqrt(3) %i   1              2        2   1
(%t5)    x = (---------- - -) %t3 + ---------------- - -
                  2        2             9 %t3         3

                                   1     1
(%t6)                  x = %t3 + ----- - -
                                 9 %t3   3
(%o6)                    [%t4, %t5, %t6]
(%i6) breakup: false$
(%i7) solve (x^3 + x^2 - 1);
Solution:

             sqrt(3) %i   1
             ---------- - -
                 2        2        sqrt(23)    25 1/3
(%t7) x = --------------------- + (--------- + --)
             sqrt(23)    25 1/3    6 sqrt(3)   54
          9 (--------- + --)
             6 sqrt(3)   54

                                              sqrt(3) %i   1    1
                                           (- ---------- - -) - -
                                                  2        2    3
           sqrt(23)    25 1/3  sqrt(3) %i   1
(%t8) x = (--------- + --)    (---------- - -)
           6 sqrt(3)   54          2        2

                                            sqrt(3) %i   1
                                          - ---------- - -
                                                2        2      1
                                      + --------------------- - -
                                           sqrt(23)    25 1/3   3
                                        9 (--------- + --)
                                           6 sqrt(3)   54
            sqrt(23)    25 1/3             1             1
(%t9)  x = (--------- + --)    + --------------------- - -
            6 sqrt(3)   54          sqrt(23)    25 1/3   3
                                 9 (--------- + --)
                                    6 sqrt(3)   54
(%o9)                    [%t7, %t8, %t9]
Categories: Algebraic equations ·
Function: dimension
    dimension (eqn)
    dimension (eqn_1, …, eqn_n)

dimen is a package for dimensional analysis. load ("dimen") loads this package. demo ("dimen") displays a short demonstration.

Categories: Share packages ·
Option variable: dispflag

Default value: true

If set to false within a block will inhibit the display of output generated by the solve functions called from within the block. Termination of the block with a dollar sign, $, sets dispflag to false.

Function: funcsolve (eqn, g(t))

Returns [g(t) = ...] or [], depending on whether or not there exists a rational function g(t) satisfying eqn, which must be a first order, linear polynomial in (for this case) g(t) and g(t+1)

(%i1) eqn: (n + 1)*f(n) - (n + 3)*f(n + 1)/(n + 1) =
      (n - 1)/(n + 2);
                            (n + 3) f(n + 1)   n - 1
(%o1)        (n + 1) f(n) - ---------------- = -----
                                 n + 1         n + 2
(%i2) funcsolve (eqn, f(n));

Dependent equations eliminated:  (4 3)
                                   n
(%o2)                f(n) = ---------------
                            (n + 1) (n + 2)

Warning: this is a very rudimentary implementation – many safety checks and obvious generalizations are missing.

Categories: Algebraic equations ·
Option variable: globalsolve

Default value: false

When globalsolve is true, solved-for variables are assigned the solution values found by linsolve, and by solve when solving two or more linear equations.

When globalsolve is false, solutions found by linsolve and by solve when solving two or more linear equations are expressed as equations, and the solved-for variables are not assigned.

When solving anything other than two or more linear equations, solve ignores globalsolve. Other functions which solve equations (e.g., algsys) always ignore globalsolve.

Examples:

(%i1) globalsolve: true$
(%i2) solve ([x + 3*y = 2, 2*x - y = 5], [x, y]);
Solution

                                 17
(%t2)                        x : --
                                 7

                                   1
(%t3)                        y : - -
                                   7
(%o3)                     [[%t2, %t3]]
(%i3) x;
                               17
(%o3)                          --
                               7
(%i4) y;
                                 1
(%o4)                          - -
                                 7
(%i5) globalsolve: false$
(%i6) kill (x, y)$
(%i7) solve ([x + 3*y = 2, 2*x - y = 5], [x, y]);
Solution

                                 17
(%t7)                        x = --
                                 7

                                   1
(%t8)                        y = - -
                                   7
(%o8)                     [[%t7, %t8]]
(%i8) x;
(%o8)                           x
(%i9) y;
(%o9)                           y
Categories: Linear equations ·
Function: ieqn (ie, unk, tech, n, guess)

inteqn is a package for solving integral equations. load ("inteqn") loads this package.

ie is the integral equation; unk is the unknown function; tech is the technique to be tried from those given in the lists below; (tech = first means: try the first technique which finds a solution; tech = all means: try all applicable techniques); n is the maximum number of terms to take for taylor, neumann, firstkindseries, or fredseries (it is also the maximum depth of recursion for the differentiation method); guess is the initial guess for neumann or firstkindseries.

Two types of equations are considered. A second-kind equation of the following form,

                           b(x)
                          /
                          [
        p(x) = q(x, p(x), I     w(x, u, p(x), p(u)) du)
                          ]
                          /
                           a(x)

and a first-kind equation with the form

                         b(x)
                        /
                        [
                 f(x) = I     w(x, u, p(u)) du
                        ]
                        /
                         a(x)

The different solution techniques used require particular forms of the expressions q and w. The techniques available are the following:

Second-kind equations

  • flfrnk2nd: For fixed-limit, finite-rank integrands.
  • vlfrnk: For variable-limit, finite-rank integrands.
  • transform: Laplace transform for convolution types.
  • fredseries: Fredholm-Carleman series for linear equations.
  • tailor: Taylor series for quasi-linear variable-limit equations.
  • neumann: Neumann series for quasi-second kind equations.
  • collocate: Collocation using a power series form for p(x) evaluated at equally spaced points.

First-kind equations

  • flfrnk1st: For fixed-limit, finite-rank integrands.
  • vlfrnk: For variable-limit, finite-rank integrands.
  • abel: For singular integrands
  • transform: See above
  • collocate: See above
  • firstkindseries: Iteration technique similar to neumann series.

The default values for the 2nd thru 5th parameters in the calling form are:

unk: p(x), where p is the first function encountered in an integrand which is unknown to Maxima and x is the variable which occurs as an argument to the first occurrence of p found outside of an integral in the case of secondkind equations, or is the only other variable besides the variable of integration in firstkind equations. If the attempt to search for x fails, the user will be asked to supply the independent variable. tech: first. n: 1. guess: none which will cause neumann and firstkindseries to use f(x) as an initial guess.

Examples:

(%i1) load("inteqn")$

(%i2) e: p(x) - 1 -x + cos(x) + 'integrate(cos(x-u)*p(u),u,0,x)$

(%i3) ieqn(e, p(x), 'transform);
default 4th arg, number of iterations or coll. parms.:  1 
default 5th arg, initial guess:  none 

(%t3)                           [x, transform]
(%o3)                               [%t3]
(%i4) e: 2*'integrate(p(x*sin(u)), u, 0, %pi/2) - a*x - b$

(%i5) ieqn(e, p(x), 'firstkindseries);
default 4th arg, number of iterations or coll. parms.:  1 
default 5th arg, initial guess:  none 

(%t5)          [2 a x + %pi b, firstkindseries, 1, approximate]
(%o5)                               [%t5]
Categories: Integral equations ·
Option variable: ieqnprint

Default value: true

ieqnprint governs the behavior of the result returned by the ieqn command. When ieqnprint is false, the lists returned by the ieqn function are of the form

[solution, technique used, nterms, flag]

where flag is absent if the solution is exact.

Otherwise, it is the word approximate or incomplete corresponding to an inexact or non-closed form solution, respectively. If a series method was used, nterms gives the number of terms taken (which could be less than the n given to ieqn if an error prevented generation of further terms).

Categories: Integral equations ·
Function: lhs (expr)

Returns the left-hand side (that is, the first argument) of the expression expr, when the operator of expr is one of the relational operators < <= = # equal notequal >= >, one of the assignment operators := ::= : ::, or a user-defined binary infix operator, as declared by infix.

When expr is an atom or its operator is something other than the ones listed above, lhs returns expr.

See also rhs.

Examples:

(%i1) e: aa + bb = cc;
(%o1)                     bb + aa = cc
(%i2) lhs (e);
(%o2)                        bb + aa
(%i3) rhs (e);
(%o3)                          cc
(%i4) [lhs (aa < bb), lhs (aa <= bb), lhs (aa >= bb),
       lhs (aa > bb)];
(%o4)                   [aa, aa, aa, aa]
(%i5) [lhs (aa = bb), lhs (aa # bb), lhs (equal (aa, bb)),
       lhs (notequal (aa, bb))];
(%o5)                   [aa, aa, aa, aa]
(%i6) e1: '(foo(x) := 2*x);
(%o6)                     foo(x) := 2 x
(%i7) e2: '(bar(y) ::= 3*y);
(%o7)                    bar(y) ::= 3 y
(%i8) e3: '(x : y);
(%o8)                         x : y
(%i9) e4: '(x :: y);
(%o9)                        x :: y
(%i10) [lhs (e1), lhs (e2), lhs (e3), lhs (e4)];
(%o10)               [foo(x), bar(y), x, x]
(%i11) infix ("][");
(%o11)                         ][
(%i12) lhs (aa ][ bb);
(%o12)                         aa
Categories: Expressions ·
Function: linsolve ([expr_1, …, expr_m], [x_1, …, x_n])

Solves the list of simultaneous linear equations for the list of variables. The expressions must each be polynomials in the variables and may be equations. If the length of the list of variables doesn’t match the number of linearly-independent equations to solve the result will be an empty list.

When globalsolve is true, each solved-for variable is bound to its value in the solution of the equations.

When backsubst is false, linsolve does not carry out back substitution after the equations have been triangularized. This may be necessary in very big problems where back substitution would cause the generation of extremely large expressions.

When linsolve_params is true, linsolve also generates the %r symbols used to represent arbitrary parameters described in the manual under algsys. Otherwise, linsolve solves an under-determined system of equations with some variables expressed in terms of others.

When programmode is false, linsolve displays the solution with intermediate expression (%t) labels, and returns the list of labels.

See also algsys, eliminate. and solve.

Examples:

(%i1) e1: x + z = y;
(%o1)                       z + x = y
(%i2) e2: 2*a*x - y = 2*a^2;
                                       2
(%o2)                   2 a x - y = 2 a
(%i3) e3: y - 2*z = 2;
(%o3)                      y - 2 z = 2
(%i4) [globalsolve: false, programmode: true];
(%o4)                     [false, true]
(%i5) linsolve ([e1, e2, e3], [x, y, z]);
(%o5)            [x = a + 1, y = 2 a, z = a - 1]
(%i6) [globalsolve: false, programmode: false];
(%o6)                    [false, false]
(%i7) linsolve ([e1, e2, e3], [x, y, z]);
Solution

(%t7)                       z = a - 1

(%t8)                        y = 2 a

(%t9)                       x = a + 1
(%o9)                    [%t7, %t8, %t9]
(%i9) ''%;
(%o9)            [z = a - 1, y = 2 a, x = a + 1]
(%i10) [globalsolve: true, programmode: false];
(%o10)                    [true, false]
(%i11) linsolve ([e1, e2, e3], [x, y, z]);
Solution

(%t11)                      z : a - 1

(%t12)                       y : 2 a

(%t13)                      x : a + 1
(%o13)                 [%t11, %t12, %t13]
(%i13) ''%;
(%o13)           [z : a - 1, y : 2 a, x : a + 1]
(%i14) [x, y, z];
(%o14)                 [a + 1, 2 a, a - 1]
(%i15) [globalsolve: true, programmode: true];
(%o15)                    [true, true]
(%i16) linsolve ([e1, e2, e3], '[x, y, z]);
(%o16)           [x : a + 1, y : 2 a, z : a - 1]
(%i17) [x, y, z];
(%o17)                 [a + 1, 2 a, a - 1]
Categories: Linear equations ·
Option variable: linsolvewarn

Default value: true

When linsolvewarn is true, linsolve prints a message "Dependent equations eliminated".

Categories: Linear equations ·
Option variable: linsolve_params

Default value: true

When linsolve_params is true, linsolve also generates the %r symbols used to represent arbitrary parameters described in the manual under algsys. Otherwise, linsolve solves an under-determined system of equations with some variables expressed in terms of others.

Categories: Linear equations ·
System variable: multiplicities

Default value: not_set_yet

multiplicities is set to a list of the multiplicities of the individual solutions returned by solve or realroots.

Categories: Algebraic equations · Polynomials ·
Function: nroots (p, low, high)

Returns the number of real roots of the real univariate polynomial p in the half-open interval (low, high]. The endpoints of the interval may be minf or inf.

nroots uses the method of Sturm sequences.

(%i1) p: x^10 - 2*x^4 + 1/2$
(%i2) nroots (p, -6, 9.1);
(%o2)                           4
Categories: Polynomials · Numerical methods ·
Function: nthroot (p, n)

where p is a polynomial with integer coefficients and n is a positive integer returns q, a polynomial over the integers, such that q^n = p or prints an error message indicating that p is not a perfect nth power. This routine is much faster than factor or even sqfr.

Categories: Polynomials ·
Option variable: polyfactor

Default value: false

The option variable polyfactor when true causes allroots and bfallroots to factor the polynomial over the real numbers if the polynomial is real, or over the complex numbers, if the polynomial is complex.

See allroots for an example.

Categories: Polynomials · Numerical methods ·
Option variable: programmode

Default value: true

When programmode is true, solve, realroots, allroots, and linsolve return solutions as elements in a list. (Except when backsubst is set to false, in which case programmode: false is assumed.)

When programmode is false, solve, etc. create intermediate expression labels %t1, %t2, etc., and assign the solutions to them.

Categories: Algebraic equations · Polynomials ·
Option variable: realonly

Default value: false

When realonly is true, algsys returns only those solutions which are free of %i.

Categories: Algebraic equations ·
Function: realroots
    realroots (expr, bound)
    realroots (eqn, bound)
    realroots (expr)
    realroots (eqn)

Computes rational approximations of the real roots of the polynomial expr or polynomial equation eqn of one variable, to within a tolerance of bound. Coefficients of expr or eqn must be literal numbers; symbol constants such as %pi are rejected.

realroots assigns the multiplicities of the roots it finds to the global variable multiplicities.

realroots constructs a Sturm sequence to bracket each root, and then applies bisection to refine the approximations. All coefficients are converted to rational equivalents before searching for roots, and computations are carried out by exact rational arithmetic. Even if some coefficients are floating-point numbers, the results are rational (unless coerced to floats by the float or numer flags).

When bound is less than 1, all integer roots are found exactly. When bound is unspecified, it is assumed equal to the global variable rootsepsilon.

When the global variable programmode is true, realroots returns a list of the form [x = x_1, x = x_2, ...]. When programmode is false, realroots creates intermediate expression labels %t1, %t2, …, assigns the results to them, and returns the list of labels.

See also allroots, bfallroots, guess_exact_value, and lhs.

Examples:

(%i1) realroots (-1 - x + x^5, 5e-6);
                               612003
(%o1)                     [x = ------]
                               524288
(%i2) ev (%[1], float);
(%o2)                 x = 1.167303085327148
(%i3) ev (-1 - x + x^5, %);
(%o3)                - 7.396496210176905E-6
(%i1) realroots (expand ((1 - x)^5 * (2 - x)^3 * (3 - x)), 1e-20);
(%o1)                 [x = 1, x = 2, x = 3]
(%i2) multiplicities;
(%o2)                       [5, 3, 1]
Categories: Polynomials · Numerical methods ·
Function: rhs (expr)

Returns the right-hand side (that is, the second argument) of the expression expr, when the operator of expr is one of the relational operators < <= = # equal notequal >= >, one of the assignment operators := ::= : ::, or a user-defined binary infix operator, as declared by infix.

When expr is an atom or its operator is something other than the ones listed above, rhs returns 0.

See also lhs.

Examples:

(%i1) e: aa + bb = cc;
(%o1)                     bb + aa = cc
(%i2) lhs (e);
(%o2)                        bb + aa
(%i3) rhs (e);
(%o3)                          cc
(%i4) [rhs (aa < bb), rhs (aa <= bb), rhs (aa >= bb),
       rhs (aa > bb)];
(%o4)                   [bb, bb, bb, bb]
(%i5) [rhs (aa = bb), rhs (aa # bb), rhs (equal (aa, bb)),
       rhs (notequal (aa, bb))];
(%o5)                   [bb, bb, bb, bb]
(%i6) e1: '(foo(x) := 2*x);
(%o6)                     foo(x) := 2 x
(%i7) e2: '(bar(y) ::= 3*y);
(%o7)                    bar(y) ::= 3 y
(%i8) e3: '(x : y);
(%o8)                         x : y
(%i9) e4: '(x :: y);
(%o9)                        x :: y
(%i10) [rhs (e1), rhs (e2), rhs (e3), rhs (e4)];
(%o10)                  [2 x, 3 y, y, y]
(%i11) infix ("][");
(%o11)                         ][
(%i12) rhs (aa ][ bb);
(%o12)                         bb
Categories: Expressions ·
Option variable: rootsconmode

Default value: true

rootsconmode governs the behavior of the rootscontract command. See rootscontract for details.

Function: rootscontract (expr)

Converts products of roots into roots of products. For example, rootscontract (sqrt(x)*y^(3/2)) yields sqrt(x*y^3).

When radexpand is true and domain is real, rootscontract converts abs into sqrt, e.g., rootscontract (abs(x)*sqrt(y)) yields sqrt(x^2*y).

There is an option rootsconmode affecting rootscontract as follows:

Problem            Value of        Result of applying
                  rootsconmode        rootscontract
      
x^(1/2)*y^(3/2)      false          (x*y^3)^(1/2)
x^(1/2)*y^(1/4)      false          x^(1/2)*y^(1/4)
x^(1/2)*y^(1/4)      true           (x*y^(1/2))^(1/2)
x^(1/2)*y^(1/3)      true           x^(1/2)*y^(1/3)
x^(1/2)*y^(1/4)      all            (x^2*y)^(1/4)
x^(1/2)*y^(1/3)      all            (x^3*y^2)^(1/6)

When rootsconmode is false, rootscontract contracts only with respect to rational number exponents whose denominators are the same. The key to the rootsconmode: true examples is simply that 2 divides into 4 but not into 3. rootsconmode: all involves taking the least common multiple of the denominators of the exponents.

rootscontract uses ratsimp in a manner similar to logcontract.

Examples:

(%i1) rootsconmode: false$
(%i2) rootscontract (x^(1/2)*y^(3/2));
                                   3
(%o2)                      sqrt(x y )
(%i3) rootscontract (x^(1/2)*y^(1/4));
                                   1/4
(%o3)                     sqrt(x) y
(%i4) rootsconmode: true$
(%i5) rootscontract (x^(1/2)*y^(1/4));
(%o5)                    sqrt(x sqrt(y))
(%i6) rootscontract (x^(1/2)*y^(1/3));
                                   1/3
(%o6)                     sqrt(x) y
(%i7) rootsconmode: all$
(%i8) rootscontract (x^(1/2)*y^(1/4));
                              2   1/4
(%o8)                       (x  y)
(%i9) rootscontract (x^(1/2)*y^(1/3));
                             3  2 1/6
(%o9)                      (x  y )
(%i10) rootsconmode: false$
(%i11) rootscontract (sqrt(sqrt(x) + sqrt(1 + x))
                    *sqrt(sqrt(1 + x) - sqrt(x)));
(%o11)                          1
(%i12) rootsconmode: true$
(%i13) rootscontract (sqrt(5+sqrt(5)) - 5^(1/4)*sqrt(1+sqrt(5)));
(%o13)                          0
Categories: Simplification functions ·
Option variable: rootsepsilon

Default value: 1.0e-7

rootsepsilon is the tolerance which establishes the confidence interval for the roots found by the realroots function.

Categories: Polynomials · Numerical methods ·
Function: solve
    solve (expr, x)
    solve (expr)
    solve ([eqn_1, …, eqn_n], [x_1, …, x_n])

Solves the algebraic equation expr for the variable x and returns a list of solution equations in x. If expr is not an equation, the equation expr = 0 is assumed in its place. x may be a function (e.g. f(x)), or other non-atomic expression except a sum or product. x may be omitted if expr contains only one variable. expr may be a rational expression, and may contain trigonometric functions, exponentials, etc.

The following method is used:

Let E be the expression and X be the variable. If E is linear in X then it is trivially solved for X. Otherwise if E is of the form A*X^N + B then the result is (-B/A)^1/N) times the N’th roots of unity.

If E is not linear in X then the gcd of the exponents of X in E (say N) is divided into the exponents and the multiplicity of the roots is multiplied by N. Then solve is called again on the result. If E factors then solve is called on each of the factors. Finally solve will use the quadratic, cubic, or quartic formulas where necessary.

In the case where E is a polynomial in some function of the variable to be solved for, say F(X), then it is first solved for F(X) (call the result C), then the equation F(X)=C can be solved for X provided the inverse of the function F is known.

breakup if false will cause solve to express the solutions of cubic or quartic equations as single expressions rather than as made up of several common subexpressions which is the default.

multiplicities - will be set to a list of the multiplicities of the individual solutions returned by solve, realroots, or allroots. Try apropos (solve) for the switches which affect solve. describe may then by used on the individual switch names if their purpose is not clear.

solve ([eqn_1, ..., eqn_n], [x_1, ..., x_n]) solves a system of simultaneous (linear or non-linear) polynomial equations by calling linsolve or algsys and returns a list of the solution lists in the variables. In the case of linsolve this list would contain a single list of solutions. It takes two lists as arguments. The first list represents the equations to be solved; the second list is a list of the unknowns to be determined. If the total number of variables in the equations is equal to the number of equations, the second argument-list may be omitted.

When programmode is false, solve displays solutions with intermediate expression (%t) labels, and returns the list of labels.

When globalsolve is true and the problem is to solve two or more linear equations, each solved-for variable is bound to its value in the solution of the equations.

Examples:

(%i1) solve (asin (cos (3*x))*(f(x) - 1), x);

solve: using arc-trig functions to get a solution.
Some solutions will be lost.
                            %pi
(%o1)                  [x = ---, f(x) = 1]
                             6
(%i2) ev (solve (5^f(x) = 125, f(x)), solveradcan);
                                log(125)
(%o2)                   [f(x) = --------]
                                 log(5)
(%i3) [4*x^2 - y^2 = 12, x*y - x = 2];
                      2    2
(%o3)             [4 x  - y  = 12, x y - x = 2]

(%i4) solve (%, [x, y]);
(%o4) [[x = 2, y = 2], [x = .5202594388652008 %i
 - .1331240357358706, y = .07678378523787788
 - 3.608003221870287 %i], [x = - .5202594388652008 %i
 - .1331240357358706, y = 3.608003221870287 %i
 + .07678378523787788], [x = - 1.733751846381093, 
y = - .1535675710019696]]

(%i5) solve (1 + a*x + x^3, x);

                                       3
              sqrt(3) %i   1   sqrt(4 a  + 27)   1 1/3
(%o5) [x = (- ---------- - -) (--------------- - -)
                  2        2      6 sqrt(3)      2

        sqrt(3) %i   1
       (---------- - -) a
            2        2
 - --------------------------, x = 
              3
      sqrt(4 a  + 27)   1 1/3
   3 (--------------- - -)
         6 sqrt(3)      2

                          3
 sqrt(3) %i   1   sqrt(4 a  + 27)   1 1/3
(---------- - -) (--------------- - -)
     2        2      6 sqrt(3)      2

         sqrt(3) %i   1
      (- ---------- - -) a
             2        2
 - --------------------------, x = 
              3
      sqrt(4 a  + 27)   1 1/3
   3 (--------------- - -)
         6 sqrt(3)      2

         3
 sqrt(4 a  + 27)   1 1/3               a
(--------------- - -)    - --------------------------]
    6 sqrt(3)      2                  3
                              sqrt(4 a  + 27)   1 1/3
                           3 (--------------- - -)
                                 6 sqrt(3)      2
(%i6) solve (x^3 - 1);
             sqrt(3) %i - 1        sqrt(3) %i + 1
(%o6)   [x = --------------, x = - --------------, x = 1]
                   2                     2
(%i7) solve (x^6 - 1);
           sqrt(3) %i + 1      sqrt(3) %i - 1
(%o7) [x = --------------, x = --------------, x = - 1, 
                 2                   2

                     sqrt(3) %i + 1        sqrt(3) %i - 1
               x = - --------------, x = - --------------, x = 1]
                           2                     2
(%i8) ev (x^6 - 1, %[1]);
                                      6
                      (sqrt(3) %i + 1)
(%o8)                 ----------------- - 1
                             64
(%i9) expand (%);
(%o9)                           0
(%i10) x^2 - 1;
                              2
(%o10)                       x  - 1
(%i11) solve (%, x);
(%o11)                  [x = - 1, x = 1]
(%i12) ev (%th(2), %[1]);
(%o12)                          0

The symbols %r are used to denote arbitrary constants in a solution.

(%i1) solve([x+y=1,2*x+2*y=2],[x,y]);

solve: dependent equations eliminated: (2)
(%o1)                      [[x = 1 - %r1, y = %r1]]

See algsys and %rnum_list for more information.

Categories: Algebraic equations ·
Option variable: solvedecomposes

Default value: true

When solvedecomposes is true, solve calls polydecomp if asked to solve polynomials.

Categories: Algebraic equations ·
Option variable: solveexplicit

Default value: false

When solveexplicit is true, inhibits solve from returning implicit solutions, that is, solutions of the form F(x) = 0 where F is some function.

Categories: Algebraic equations ·
Option variable: solvefactors

Default value: true

When solvefactors is false, solve does not try to factor the expression. The false setting may be desired in some cases where factoring is not necessary.

Categories: Algebraic equations ·
Option variable: solvenullwarn

Default value: true

When solvenullwarn is true, solve prints a warning message if called with either a null equation list or a null variable list. For example, solve ([], []) would print two warning messages and return [].

Categories: Algebraic equations ·
Option variable: solveradcan

Default value: false

When solveradcan is true, solve calls radcan which makes solve slower but will allow certain problems containing exponentials and logarithms to be solved.

Categories: Algebraic equations ·
Option variable: solvetrigwarn

Default value: true

When solvetrigwarn is true, solve may print a message saying that it is using inverse trigonometric functions to solve the equation, and thereby losing solutions.

Categories: Algebraic equations ·

Next: , Previous:   [Contents][Index]