Next: Gnuplot_pipes Format Functions, Previous: Plotting Options, Up: Plotting [Contents][Index]
There are several plot options specific to gnuplot. All of them consist of a keyword (the name of the option), followed by a string that should be a valid gnuplot command, to be passed directly to gnuplot. In most cases, there exist a corresponding plotting option that will produce a similar result and whose use is more recommended than the gnuplot specific option.
Sets the output terminal type for gnuplot. The argument terminal_name can be a string or one of the following 3 special symbols
Gnuplot output is displayed in a separate graphical window and the
gnuplot terminal used will be specified by the value of the option
gnuplot_default_term_command
.
Gnuplot output is saved to a file maxout_xxx.gnuplot
using "ASCII
art" approximation to graphics. If the option gnuplot_out_file
is
set to filename, the plot will be saved there, instead of the
default maxout_xxx.gnuplot
. The settings for the “dumb” terminal of
Gnuplot are given by the value of option
gnuplot_dumb_term_command
. If option run_viewer
is set
to true and the plot_format is gnuplot
that ASCII representation
will also be shown in the Maxima or Xmaxima console.
Gnuplot generates commands in the PostScript page description language.
If the option gnuplot_out_file
is set to filename, gnuplot
writes the PostScript commands to filename. Otherwise, it is
saved as maxplot.ps
file. The settings for this terminal are given by the value of the option gnuplot_dumb_term_command
.
Gnuplot can generate output in many other graphical formats such as png,
jpeg, svg etc. To use those formats, option gnuplot_term
can be
set to any supported gnuplot term name (which must be a symbol) or even a
full gnuplot term specification with any valid options (which must be a string). For
example [gnuplot_term, png]
creates output in PNG (Portable
Network Graphics) format while [gnuplot_term, "png size
1000,1000"]
creates PNG of 1000 x 1000 pixels size. If the option
gnuplot_out_file
is set to filename, gnuplot writes the
output to filename. Otherwise, it is saved as
maxplot.term
file, where term is gnuplot terminal
name.
It can be used to replace the default name for the file that contains
the commands that will interpreted by gnuplot, when the terminal is set
to default
, or to replace the default name of the graphic file
that gnuplot creates, when the terminal is different from
default
. If it contains one or more slashes, “/”, the name of
the file will be left as it is; otherwise, it will be appended to the
path of the temporary directory. The complete name of the files created
by the plotting commands is always sent as output of those commands so
they can be seen if the command is ended by semi-colon.
When used in conjunction with the gnuplot_term
option, it can be
used to save the plot in a file, in one of the graphic formats supported
by Gnuplot. To create PNG, PDF, Postscript or SVG, it is easier to use
options png_file
, pdf_file
, ps_file
,
or svg_file
.
Creates a plot with plot2d
, plot3d
, mandelbrot
or
julia
using the gnuplot
plot_format
and saving
the script sent to Gnuplot in the file specified by file_name_or_function.
The value file_name_or_function can be a string or a Maxima function of
one variable that returns a string. If that string corresponds to a
complete file path (directory and file name), the script will be created in
that file and will not be deleted after Maxima is closed; otherwise, the
string will give the name of a file to be created in the temporary directory
and deleted when Maxima is closed.
In this example, the script file name is set to “sin.gnuplot”, in the current directory.
(%i1) plot2d( sin(x), [x,0,2*%pi], [gnuplot_script_file, "./sin.gnuplot"]); (%o1) ["./sin.gnuplot"]
In this example, gnuplot_maxout_prt(file)
is a function
that takes the default file name, file. It constructs a full file
name for the data file by interpolating a random 8-digit integer with a
pad of zeros into the default file name (“maxout” followed by the id
number of the Maxima process, followed by “.gnuplot”). The temporary
directory is determined by maxima_tempdir
(it is “/tmp” in this
example).
(%i1) gnuplot_maxout_prt(file) := block([beg,end], [beg,end] : split(file,"."), printf(false,"~a_~8,'0d.~a",beg,random(10^8-1),end)) $ (%i2) plot2d( sin(x), [x,0,2*%pi], [gnuplot_script_file, gnuplot_maxout_prt]); (%o2) ["/tmp/maxout68715_09606909.gnuplot"]
By default, the script would have been saved in a file named
maxoutXXXXX.gnuplot
(XXXXX=68715 in this example) in the temporary
directory. If the print statement in function gnuplot_maxout_prt
above included a directory path, the file would have been saved in that
directory rather than in the temporary directory.
With a value of false
, it can be used to disable the use of PM3D
mode, which is enabled by default.
This option inserts gnuplot commands before any other commands sent to
Gnuplot. Any valid gnuplot commands may be used. Multiple commands should
be separated with a semi-colon. See also gnuplot_postamble
.
This option inserts gnuplot commands after other commands sent to
Gnuplot and right before the plot command is sent. Any valid gnuplot
commands may be used. Multiple commands should be separated with a
semi-colon. See also gnuplot_preamble
.
[gnuplot_default_term_command, command]
The gnuplot command to set the terminal type for the default
terminal. It this option is not set, the command used will be: "set term wxt size 640,480 font \",12\"; set term pop"
.
[gnuplot_dumb_term_command, command]
The gnuplot command to set the terminal type for the dumb terminal. It
this option is not set, the command used will be: "set term dumb
79 22"
, which makes the text output 79 characters by 22 characters.
The gnuplot command to set the terminal type for the PDF
terminal. If this option is not set, the command used will be: "set term pdfcairo color solid lw 3 size 17.2 cm, 12.9 cm font \",18\""
. See the gnuplot documentation for more information.
The gnuplot command to set the terminal type for the PNG terminal. If
this option is not set, the command used will be:
"set term pngcairo font \",12\""
. See the gnuplot documentation
for more information.
The gnuplot command to set the terminal type for the PostScript
terminal. If this option is not set, the command used will be: "set term postscript eps color solid lw 2 size 16.4 cm, 12.3 cm font \",24\""
. See the gnuplot documentation for set term postscript
for
more information.
With a value of true
, all strings used in labels and titles will
be interpreted by gnuplot as “enhanced” text, if the terminal being used
supports it. In enhanced mode, some characters such as ^ and _ are not
printed, but interpreted as formatting characters. For a list of the
formatting characters and their meaning, see the documentation for enhanced
in Gnuplot. The default value for this option is false
, which will
not treat any characters as formatting characters.
The gnuplot command to set the terminal type for the SVG
terminal. If this option is not set, the command used will be:
"set term svg font \",14\""
. See the gnuplot documentation for
more information.
Next: Gnuplot_pipes Format Functions, Previous: Plotting Options, Up: Plotting [Contents][Index]