cmucl attempts to make the full power of the underlying environment available to the Lisp programmer. This is done using combination of hand-coded interfaces and foreign function calls to C libraries. Although the techniques differ, the style of interface is similar. This chapter provides an overview of the facilities available and general rules for using them, as well as describing specific features in detail. It is assumed that the reader has a working familiarity with Unix and X11, as well as access to the standard system documentation.
The shell parses the command line with which Lisp is invoked, and passes a data structure containing the parsed information to Lisp. This information is then extracted from that data structure and put into a set of Lisp data structures.
The value of *command-line-words* is a list of strings that make up the command line, one word per string. The first word on the command line, i.e. the name of the program invoked (usually lisp) is stored in *command-line-utility-name*. The value of *command-line-switches* is a list of command-line-switch structures, with a structure for each word on the command line starting with a hyphen. All the command line words between the program name and the first switch are stored in *command-line-words*.
The following functions may be used to examine command-line-switch structures.
Returns the name of the switch, less the preceding hyphen and trailing equal sign (if any).
Returns the value designated using an embedded equal sign, if any. If the switch has no equal sign, then this is null.
Returns a list of the words between this switch and the next switch or the end of the command line.
Returns the first non-null value from cmd-switch-value, the first element in cmd-switch-words, or the first word in command-line-words.
This function takes the name of a switch as a string and returns the value of the switch given on the command line. If no value was specified, then any following words are returned. If there are no following words, then t is returned. If the switch was not specified, then nil is returned.
This macro causes function to be called when the switch name appears in the command line. Name is a simple-string that does not begin with a hyphen (unless the switch name really does begin with one.)
If function is not supplied, then the switch is parsed into command-line-switches, but otherwise ignored. This suppresses the undefined switch warning which would otherwise take place. The warning can also be globally suppressed by complain-about-illegal-switches.
Streams connected to the standard input, output and error file descriptors.
A stream connected to /dev/tty.
The environment variables inherited by the current process, as a keyword-indexed alist. For example, to access the DISPLAY environment variable, you could use(cdr (assoc :display ext:*environment-list*))
Note that the case of the variable name is preserved when converting to a keyword. Therefore, you need to specify the keyword properly for variable names containing lower-case letters,
The UNIX documentation describes the system interface in terms of C procedure headers. The corresponding Lisp function will have a somewhat different interface, since Lisp argument passing conventions and datatypes are different.
The main difference in the argument passing conventions is that Lisp does not support passing values by reference. In Lisp, all argument and results are passed by value. Interface functions take some fixed number of arguments and return some fixed number of values. A given “parameter” in the C specification will appear as an argument, return value, or both, depending on whether it is an In parameter, Out parameter, or In/Out parameter. The basic transformation one makes to come up with the Lisp equivalent of a C routine is to remove the Out parameters from the call, and treat them as extra return values. In/Out parameters appear both as arguments and return values. Since Out and In/Out parameters are only conventions in C, you must determine the usage from the documentation.
Thus, the C routine declared as
kern_return_t lookup(servport, portsname, portsid) port servport; char *portsname; int *portsid; /* out */ ... *portsid = <expression to compute portsid field> return(KERN_SUCCESS);
has as its Lisp equivalent something like
(defun lookup (ServPort PortsName) ... (values success <expression to compute portsid field>))
If there are multiple out or in-out arguments, then there are multiple additional returns values.
Fortunately, cmucl programmers rarely have to worry about the nuances of this translation process, since the names of the arguments and return values are documented in a way so that the describe function (and the Hemlock Describe Function Call command, invoked with C-M-Shift-A) will list this information. Since the names of arguments and return values are usually descriptive, the information that describe prints is usually all one needs to write a call. Most programmers use this on-line documentation nearly all of the time, and thereby avoid the need to handle bulky manuals and perform the translation from barbarous tongues.
Lisp data types have very different representations from those used by conventional languages such as C. Since the system interfaces are designed for conventional languages, Lisp must translate objects to and from the Lisp representations. Many simple objects have a direct translation: integers, characters, strings and floating point numbers are translated to the corresponding Lisp object. A number of types, however, are implemented differently in Lisp for reasons of clarity and efficiency.
Instances of enumerated types are expressed as keywords in Lisp. Records, arrays, and pointer types are implemented with the Alien facility (see section 8). Access functions are defined for these types which convert fields of records, elements of arrays, or data referenced by pointers into Lisp objects (possibly another object to be referenced with another access function).
One should dispose of Alien objects created by constructor functions or returned from remote procedure calls when they are no longer of any use, freeing the virtual memory associated with that object. Since Aliens contain pointers to non-Lisp data, the garbage collector cannot do this itself. If the memory was obtained from make-alien or from a foreign function call to a routine that used malloc, then free-alien should be used.
Note that in some cases an address is represented by a Lisp integer, and in other cases it is represented by a real pointer. Pointers are usually used when an object in the current address space is being referred to. The MACH virtual memory manipulation calls must use integers, since in principle the address could be in any process, and Lisp cannot abide random pointers. Because these types are represented differently in Lisp, one must explicitly coerce between these representations.
System Area Pointers (SAPs) provide a mechanism that bypasses the Alien type system and accesses virtual memory directly. A SAP is a raw byte pointer into the lisp process address space. SAPs are represented with a pointer descriptor, so SAP creation can cause consing. However, the compiler uses a non-descriptor representation for SAPs when possible, so the consing overhead is generally minimal. See section 5.11.2.
The function sap-int is used to generate an integer corresponding to the system area pointer, suitable for passing to the kernel interfaces (which want all addresses specified as integers). The function int-sap is used to do the opposite conversion. The integer representation of a SAP is the byte offset of the SAP from the start of the address space.
This function adds a byte offset to sap, returning a new SAP.
These functions return the 8, 16 or 32 bit unsigned integer at offset from sap. The offset is always a byte offset, regardless of the number of bits accessed. setf may be used with the these functions to deposit values into virtual memory.
These functions are the same as the above unsigned operations, except that they sign-extend, returning a negative number if the high bit is set.
You probably won’t have much cause to use them, but all the Unix system calls are available. The Unix system call functions are in the Unix package. The name of the interface for a particular system call is the name of the system call prepended with unix-. The system usually defines the associated constants without any prefix name. To find out how to use a particular system call, try using describe on it. If that is unhelpful, look at the source in unix.lisp or consult your system maintainer.
The Unix system calls indicate an error by returning nil as the first value and the Unix error number as the second value. If the call succeeds, then the first value will always be non-nil, often t.
For example, to use the chdir syscall:
(multiple-value-bind (success errno) (unix:unix-chdir "/tmp") (unless success (error "Can’t change working directory: ~a" (unix:get-unix-error-msg errno))))
This function returns a string describing the Unix error number error (this is similar to the Unix function perror).
Many of the UNIX system calls return file descriptors. Instead of using other UNIX system calls to perform I/O on them, you can create a stream around them. For this purpose, fd-streams exist. See also read-n-bytes.
|system:make-fd-stream descriptor &key||:input :output :element-type|
|:buffering :name :file :original|
This function creates a file descriptor stream using descriptor. If :input is non-nil, input operations are allowed. If :output is non-nil, output operations are allowed. The default is input only. These keywords are defined:
- is the type of the unit of transaction for the stream, which defaults to string-char. See the Common Lisp description of open for valid values.
- is the kind of output buffering desired for the stream. Legal values are :none for no buffering, :line for buffering up to each newline, and :full for full buffering.
- is a simple-string name to use for descriptive purposes when the system prints an fd-stream. When printing fd-streams, the system prepends the streams name with Stream for . If name is unspecified, it defaults to a string containing file or descriptor, in order of preference.
- :file, :original
- file specifies the defaulted namestring of the associated file when creating a file stream (must be a simple-string). original is the simple-string name of a backup file containing the original contents of file while writing file.
When you abort the stream by passing t to close as the second argument, if you supplied both file and original, close will rename the original name to the file name. When you close the stream normally, if you supplied original, and delete-original is non-nil, close deletes original. If auto-close is true (the default), then descriptor will be closed when the stream is garbage collected.
- : The original pathname passed to open and returned by pathname; not defaulted or translated.
- if non-null, then timeout is an integer number of seconds after which an input wait should time out. If a read does time out, then the system:io-timeout condition is signalled.
This function returns t if object is an fd-stream, and nil if not. Obsolete: use the portable (typep x ’file-stream).
This returns the file descriptor associated with stream.
cmucl allows access to all the Unix signals that can be generated under Unix. It should be noted that if this capability is abused, it is possible to completely destroy the running Lisp. The following macros and functions allow access to the Unix interrupt system. The signal names as specified in section 2 of the Unix Programmer’s Manual are exported from the Unix package.
This macro should be called with a list of signal specifications, specs. Each element of specs should be a list of two elements: the first should be the Unix signal for which a handler should be established, the second should be a function to be called when the signal is received One or more signal handlers can be established in this way. with-enabled-interrupts establishes the correct signal handlers and then executes the forms in body. The forms are executed in an unwind-protect so that the state of the signal handlers will be restored to what it was before the with-enabled-interrupts was entered. A signal handler function specified as NIL will set the Unix signal handler to the default which is normally either to ignore the signal or to cause a core dump depending on the particular signal.
It is sometimes necessary to execute a piece a code that can not be interrupted. This macro the forms in body with interrupts disabled. Note that the Unix interrupts are not actually disabled, rather they are queued until after body has finished executing.
When executing an interrupt handler, the system disables interrupts, as if the handler was wrapped in in a without-interrupts. The macro with-interrupts can be used to enable interrupts while the forms in body are evaluated. This is useful if body is going to enter a break loop or do some long computation that might need to be interrupted.
For some interrupts, such as SIGTSTP (suspend the Lisp process and return to the Unix shell) it is necessary to leave Hemlock and then return to it. This macro executes the forms in body after exiting Hemlock. When body has been executed, control is returned to Hemlock.
This function establishes function as the handler for signal. Unless you want to establish a global signal handler, you should use the macro with-enabled-interrupts to temporarily establish a signal handler. enable-interrupt returns the old function associated with the signal.
Ignore-interrupt sets the Unix signal mechanism to ignore signal which means that the Lisp process will never see the signal. Ignore-interrupt returns the old function associated with the signal or nil if none is currently defined.
Default-interrupt can be used to tell the Unix signal mechanism to perform the default action for signal. For details on what the default action for a signal is, see section 2 of the Unix Programmer’s Manual. In general, it is likely to ignore the signal or to cause a core dump.
The following code is the signal handler used by the Lisp system for the SIGINT signal.
(defun ih-sigint (signal code scp) (declare (ignore signal code scp)) (without-hemlock (with-interrupts (break "Software Interrupt" t))))
The without-hemlock form is used to make sure that Hemlock is exited before a break loop is entered. The with-interrupts form is used to enable interrupts because the user may want to generate an interrupt while in the break loop. Finally, break is called to enter a break loop, so the user can look at the current state of the computation. If the user proceeds from the break loop, the computation will be restarted from where it was interrupted.
The following function is the Lisp signal handler for the SIGTSTP signal which suspends a process and returns to the Unix shell.
(defun ih-sigtstp (signal code scp) (declare (ignore signal code scp)) (without-hemlock (Unix:unix-kill (Unix:unix-getpid) Unix:sigstop)))
Lisp uses this interrupt handler to catch the SIGTSTP signal because it is necessary to get out of Hemlock in a clean way before returning to the shell.
To set up these interrupt handlers, the following is recommended:
(with-enabled-interrupts ((Unix:SIGINT #’ih-sigint) (Unix:SIGTSTP #’ih-sigtstp)) <user code to execute with the above signal handlers enabled.> )